From: Ajit Pandey <ajitp@xxxxxxxxxxxxxx> Add the I2S controller node to sc7180 dtsi. Add pinmux for pirmary and secondary I2S. Signed-off-by: Ajit Pandey <ajitp@xxxxxxxxxxxxxx> Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx> --- This patch depends on these patch series so it is not ready to be merged now. - clk: qcom: Support for Low Power Audio Clocks on SC7180 https://patchwork.kernel.org/cover/11664273/ - arm64: dts: qcom: sc7180: Add LPASS clock controller nodes https://patchwork.kernel.org/patch/11664303/ - ASoC: qcom: Add support for SC7180 lpass variant https://patchwork.kernel.org/cover/11650649/ arch/arm64/boot/dts/qcom/sc7180.dtsi | 132 +++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 6eb14b6a47f5..2fe3bd89f950 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -511,6 +511,34 @@ qusb2p_hstx_trim: hstx-trim-primary@25b { }; }; + lpass_cpu: lpass { + compatible = "qcom,lpass-cpu-sc7180"; + + reg = <0 0x62F00000 0 0x29000>; + reg-names = "lpass-lpaif"; + + iommus = <&apps_smmu 0x1020 0>; + + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + + status = "disabled"; + + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, + <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, + <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, + <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; + + clock-names = "noc", "audio-core", "mclk0", "sysnoc_mport", + "pri_ibit", "sec_ibit"; + + #sound-dai-cells = <1>; + + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpass-irq-lpaif"; + }; + sdhc_1: sdhci@7c4000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x7c4000 0 0x1000>, @@ -1357,6 +1385,110 @@ pinmux { }; }; + sec_mi2s_active: sec-mi2s-active { + pinmux { + pins = "gpio49"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio49"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + sec_mi2s_ws_active: sec-mi2s-ws-active { + pinmux { + pins = "gpio50"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio50"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + sec_mi2s_dout_active: sec-mi2s-dout-active { + pinmux { + pins = "gpio51"; + function = "mi2s_1"; + }; + + pinconf { + pins = "gpio51"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_active: pri-mi2s-active { + pinmux { + pins = "gpio53"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio53"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_ws_active: pri-mi2s-ws-active { + pinmux { + pins = "gpio54"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio54"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_dout_active: pri-mi2s-dout-active { + pinmux { + pins = "gpio55"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio55"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_din_active: pri-mi2s-din-active { + pinmux { + pins = "gpio56"; + function = "mi2s_0"; + }; + + pinconf { + pins = "gpio56"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio57"; + function = "lpass_ext"; + }; + + pinconf { + pins = "gpio57"; + drive-strength = <8>; + bias-pull-up; + }; + }; + sdc1_on: sdc1-on { pinconf-clk { pins = "sdc1_clk"; -- 2.28.0.rc0.105.gf9edc3c819-goog
