Re: [PATCH v8 1/2] phy: qualcomm: add qcom ipq806x dwc usb phy driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13-07-20, 15:23, Ansuel Smith wrote:

> +static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
> +					  u32 offset,
> +					  const u32 mask, u32 val)
> +{
> +	u32 write_val, tmp = readl(phy_dwc3->base + offset);
> +
> +	tmp &= ~mask;		/* retain other bits */
> +	write_val = tmp | val;
> +
> +	writel(write_val, phy_dwc3->base + offset);
> +
> +	/* Read back to see if val was written */
> +	tmp = readl(phy_dwc3->base + offset);
> +	tmp &= mask;		/* clear other bits */
> +
> +	if (tmp != val)
> +		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
> +			val, offset);

lets use single line for these, it looks much better that way. Btw we
can extend to 100 chars now :)

> +static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	resource_size_t size;
> +	struct device_node *np;
> +	struct phy *generic_phy;
> +	struct usb_phy *phy_dwc3;
> +	const struct phy_drvdata *data;
> +	const struct of_device_id *match;
> +	struct phy_provider *phy_provider;
> +
> +	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
> +	if (!phy_dwc3)
> +		return -ENOMEM;
> +
> +	match = of_match_node(qcom_ipq806x_usb_phy_table, pdev->dev.of_node);
> +	data = match->data;
> +
> +	phy_dwc3->dev = &pdev->dev;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -EINVAL;
> +	size = resource_size(res);
> +	phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
> +
> +	if (IS_ERR(phy_dwc3->base)) {
> +		dev_err(phy_dwc3->dev, "failed to map reg\n");
> +		return PTR_ERR(phy_dwc3->base);
> +	}
> +
> +	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
> +	if (IS_ERR(phy_dwc3->ref_clk)) {
> +		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
> +		return PTR_ERR(phy_dwc3->ref_clk);
> +	}
> +
> +	clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
> +
> +	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
> +	if (IS_ERR(phy_dwc3->xo_clk)) {
> +		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
> +		phy_dwc3->xo_clk = NULL;
> +	}
> +
> +	/* Parse device node to probe HSIO settings */
> +	np = of_node_get(pdev->dev.of_node);
> +	if (!of_compat_cmp(match->compatible, "qcom,ipq806x-usb-phy-ss",
> +			   strlen(match->compatible))) {

aha, why are we doing this? If you want to do this for only phy-ss then
you can read these optionally and set them if found..


> +		if (of_property_read_u32(np, "qcom,rx-eq", &phy_dwc3->rx_eq) ||
> +		    of_property_read_u32(np, "qcom,tx-deamp_3_5db",
> +					 &phy_dwc3->tx_deamp_3_5db) ||
> +		    of_property_read_u32(np, "qcom,mpll", &phy_dwc3->mpll)) {
> +			dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
> +
> +			/* Default HSIO settings */
> +			phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
> +			phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
> +			phy_dwc3->mpll = SSPHY_MPLL_VALUE;
> +		}
> +	}
> +
> +	generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
> +				      &data->ops);
> +
> +	if (IS_ERR(generic_phy))
> +		return PTR_ERR(generic_phy);
> +
> +	phy_set_drvdata(generic_phy, phy_dwc3);
> +	platform_set_drvdata(pdev, phy_dwc3);
> +
> +	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
> +						     of_phy_simple_xlate);
> +
> +	if (IS_ERR(phy_provider))
> +		return PTR_ERR(phy_provider);
> +
> +	return 0;
> +}

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux