Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/14/2020 6:06 AM, Matthias Kaehlcke wrote:
On Thu, Jul 02, 2020 at 02:26:14PM +0530, Rajendra Nayak wrote:

On 7/1/2020 10:24 PM, Matthias Kaehlcke wrote:
On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
Add the OPP tables in order to be able to vote on the performance state
of a power-domain

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
   arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
   1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ad57df2..738a741 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2392,8 +2392,10 @@
   			reg = <0 0x0aa00000 0 0xff000>;
   			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
   			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>;
-			power-domain-names = "venus", "vcodec0";
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd SC7180_CX>;
+			power-domain-names = "venus", "vcodec0", "opp-pd";
+			operating-points-v2 = <&venus_opp_table>;
   			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
   				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
   				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -2414,6 +2416,35 @@
   			video-encoder {
   				compatible = "venus-encoder";
   			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <340000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <434000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};

the labels of the OPP nodes don't match the specified frequencies

Oops, I'll fix and respin.

ping, it seems the respin is still pending

I was waiting on Rob to first ack the bindings update patch [1] before I respin
these, however I have not seen a response from Rob on the bindings patch yet,
despite a couple pings. So I'll respin this series anyway.

[1] https://lore.kernel.org/patchwork/patch/1241077/

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux