[PATCH v4 0/4] Add LT9611 DSI to HDMI bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This series adds driver and bindings for Lontium LT9611 bridge chip which
takes MIPI DSI as input and HDMI as output.

This chip can be found in 96boards RB3 platform [1] commonly called DB845c.

[1]: https://www.96boards.org/product/rb3-platform/

Changes in v4:
 - Add msm/dsi patch to create connector and support DRM_BRIDGE_ATTACH_NO_CONNECTOR
 - Fix comments provided by Sam

Changes in v3:
 - fix kbuild reported error
 - rebase on v5.8-rc1

Changes in v2:
 - Add acks by Rob
 - Fix comments reported by Emil and rename the file to lontium-lt9611.c
 - Fix comments reported by Laurent on binding and driver
 - Add HDMI audio support

Vinod Koul (4):
  dt-bindings: vendor-prefixes: Add Lontium vendor prefix
  dt-bindings: display: bridge: Add documentation for LT9611
  drm/bridge: Introduce LT9611 DSI to HDMI bridge
  drm/msm/dsi: attach external bridge with DRM_BRIDGE_ATTACH_NO_CONNECTOR

 .../display/bridge/lontium,lt9611.yaml        |  176 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/gpu/drm/bridge/Kconfig                |   13 +
 drivers/gpu/drm/bridge/Makefile               |    1 +
 drivers/gpu/drm/bridge/lontium-lt9611.c       | 1174 +++++++++++++++++
 drivers/gpu/drm/msm/dsi/dsi.c                 |    7 +-
 drivers/gpu/drm/msm/dsi/dsi_manager.c         |   27 +-
 7 files changed, 1380 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
 create mode 100644 drivers/gpu/drm/bridge/lontium-lt9611.c

-- 
2.26.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux