[PATCH 2/3] arm64: dts: sdm845: Add qspi opps and power-domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the power domain supporting performance state and the corresponding
OPP tables for the qspi device on sdm845

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31..5163090 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2915,6 +2915,30 @@
 			status = "disabled";
 		};
 
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		qspi: spi@88df000 {
 			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
 			reg = <0 0x088df000 0 0x600>;
@@ -2924,6 +2948,8 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux