Re: [PATCH v4 2/6] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 26 Jun 2020 11:55:12 -0700, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B.  The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the orientation/role,
> and communicating this information to the remote clients, which can include
> a role switch node and a type C switch.
> 
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> ---
>  .../bindings/usb/qcom,pmic-typec.yaml         | 126 ++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:40.54-42.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:43.51-45.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@1: node has a unit name, but no reg or ranges property


See https://patchwork.ozlabs.org/patch/1317984

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux