On 5/27/20 4:44 AM, Stephen Boyd wrote:
Quoting Jonathan Marek (2020-05-24 14:06:08)
diff --git a/drivers/clk/qcom/gpucc-sm8150.c b/drivers/clk/qcom/gpucc-sm8150.c
new file mode 100644
index 000000000000..6e1fff0cde75
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm8150.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
[..]
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+ .cmd_rcgr = 0x1120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_0,
+ .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gmu_clk_src",
+ .parent_names = gpu_cc_parent_names_0,
+ .num_parents = 6,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+ .halt_reg = 0x1078,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
Why is this CLK_IS_CRITICAL? Why not just enable the clk manually with
a register write in probe and then remove this clk from the system? We
can save some memory that way.
I copied this from downstream, so I don't know why. It works without it,
so I removed the CLK_IS_CRITICAL in my v2 (from both sm8150 and sm8250).
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
[...]
+
+static struct gdsc gpu_cx_gdsc = {
+ .gdscr = 0x106c,
+ .gds_hw_ctrl = 0x1540,
+ .pd = {
+ .name = "gpu_cx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+/* see comment in gpucc-sdm845 about this */
+static int gx_gdsc_enable(struct generic_pm_domain *domain)
+{
+ /* Do nothing but give genpd the impression that we were successful */
+ return 0;
+}
Maybe we should export a helper from gdsc.c for this with the comment
and it named something obvious? gx_gdsc_do_nothing_enable()?
Made this change in my v2.
+
+static struct gdsc gpu_gx_gdsc = {
+ .gdscr = 0x100c,
+ .clamp_io_ctrl = 0x1508,
+ .pd = {
+ .name = "gpu_gx_gdsc",
+ .power_on = gx_gdsc_enable,
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
+};
+
