Allow for the PHY to be put into a powered down state when possible.
Add the required suspend and resume callbacks, which will determine
what resources can be turned off depending on the cable status.
Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 4d74045271eb..152d8633f4ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -104,6 +104,63 @@ static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
readl_relaxed(base + offset);
}
+static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
+{
+ dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
+
+ if (hsphy->mode == PHY_MODE_USB_HOST) {
+ /* Enable auto-resume to meet remote wakeup timing */
+ qcom_snps_hsphy_write_mask(hsphy->base,
+ USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ USB2_AUTO_RESUME,
+ USB2_AUTO_RESUME);
+ usleep_range(500, 1000);
+ qcom_snps_hsphy_write_mask(hsphy->base,
+ USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ 0, USB2_AUTO_RESUME);
+ }
+
+ clk_disable_unprepare(hsphy->cfg_ahb_clk);
+ return 0;
+}
+
+static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
+{
+ int ret;
+
+ dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
+
+ ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
+{
+ struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+ if (!hsphy->phy_initialized)
+ return 0;
+
+ qcom_snps_hsphy_suspend(hsphy);
+ return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
+{
+ struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+ if (!hsphy->phy_initialized)
+ return 0;
+
+ qcom_snps_hsphy_resume(hsphy);
+ return 0;
+}
+
static int qcom_snps_hsphy_init(struct phy *phy)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
@@ -212,6 +269,11 @@ static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
};
MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
+static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
+ qcom_snps_hsphy_runtime_resume, NULL)
+};
+
static int qcom_snps_hsphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -255,6 +317,14 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
return ret;
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
@@ -269,6 +339,8 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
+ else
+ pm_runtime_disable(dev);
return PTR_ERR_OR_ZERO(phy_provider);
}
@@ -277,6 +349,7 @@ static struct platform_driver qcom_snps_hsphy_driver = {
.probe = qcom_snps_hsphy_probe,
.driver = {
.name = "qcom-snps-hs-femto-v2-phy",
+ .pm = &qcom_snps_hsphy_pm_ops,
.of_match_table = qcom_snps_hsphy_of_match_table,
},
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
