[PATCH v3 04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This pinout is common for every 8992-based device and
should therefore reside in the SoC device tree.

Also convert addresses into phandles.

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
 .../boot/dts/qcom/msm8992-bullhead-rev-101.dts      | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 4f70681e730d..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -23,15 +23,6 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -48,6 +39,10 @@ ramoops@1ff00000 {
 	};
 };
 
+&blsp1_uart2 {
+	status = "okay";
+};
+
 &rpm_requests {
 	pm8994-regulators {
 		compatible = "qcom,rpm-pm8994-regulators";
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux