This pinout is common for every 8992-based device and
should therefore reside in the SoC device tree.
Also convert addresses into phandles.
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
.../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 4f70681e730d..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -23,15 +23,6 @@ chosen {
stdout-path = "serial0:115200n8";
};
- soc {
- serial@f991e000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
- };
-
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -48,6 +39,10 @@ ramoops@1ff00000 {
};
};
+&blsp1_uart2 {
+ status = "okay";
+};
+
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
--
2.27.0
