[PATCH v3 7/8] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
 .../dts/qcom/msm8992-bullhead-rev-101.dts     | 225 ++++++++++++++-
 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
 2 files changed, 224 insertions(+), 269 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi

diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..a2de69292d28 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -47,4 +47,227 @@ ramoops@1ff00000 {
 	};
 };
 
-#include "msm8994-smd-rpm.dtsi"
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* TODO */
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* TODO */
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			/* TODO: value from downstream
+			regulator-min-microvolt = <987500>;
+			fails to apply */
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			/* TODO: Unsupported voltage range.
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			qcom,init-voltage = <2800000>;
+			*/
+		};
+
+		pm8994_l30: l30 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
-	rpm {
-		rpm_requests {
-			pm8994-regulators {
-
-				vdd_l1-supply = <&pm8994_s1>;
-				vdd_l2_26_28-supply = <&pm8994_s3>;
-				vdd_l3_11-supply = <&pm8994_s3>;
-				vdd_l4_27_31-supply = <&pm8994_s3>;
-				vdd_l5_7-supply = <&pm8994_s3>;
-				vdd_l6_12_32-supply = <&pm8994_s5>;
-				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
-				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
-				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
-				vdd_l14_15-supply = <&pm8994_s5>;
-				vdd_l17_29-supply = <&vreg_vph_pwr>;
-				vdd_l20_21-supply = <&vreg_vph_pwr>;
-				vdd_l25-supply = <&pm8994_s5>;
-				vdd_lvs1_2 = <&pm8994_s4>;
-
-				s1 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				s2 {
-					/* TODO */
-				};
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-set-load;
-					regulator-system-load = <325000>;
-				};
-
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				l5 {
-					/* TODO */
-				};
-
-				l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l7 {
-					/* TODO */
-				};
-
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l11 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					proxy-supply = <&pm8994_l12>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					qcom,init-voltage = <2950000>;
-					status = "okay";
-				};
-
-				l14 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-					proxy-supply = <&pm8994_l14>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l17 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l18 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					qcom,init-voltage = <3000000>;
-					qcom,init-ldo-mode = <1>;
-				};
-
-				l19 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-set-load;
-					regulator-system-load = <570000>;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l22 {
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					qcom,init-voltage = <3100000>;
-				};
-
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-				};
-
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3150000>;
-					qcom,init-voltage = <3075000>;
-				};
-
-				l25 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l26 {
-					/* TODO: value from downstream
-					regulator-min-microvolt = <987500>;
-					fails to apply */
-				};
-
-				l27 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					qcom,init-voltage = <1050000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					qcom,init-voltage = <1000000>;
-					proxy-supply = <&pm8994_l28>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-				};
-
-				l29 {
-					/* TODO: Unsupported voltage range.
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-					*/
-				};
-
-				l30 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-
-				l31 {
-					regulator-min-microvolt = <1262500>;
-					regulator-max-microvolt = <1262500>;
-					qcom,init-voltage = <1262500>;
-				};
-
-				l32 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-			};
-		};
-	};
-};
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux