On Tue, Jun 23, 2020 at 11:39 PM Konrad Dybcio <konradybcio@xxxxxxxxx> wrote:
>
> Enable tsens on this SoC using tsens-v2 driver.
>
> Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
> ---
> .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d7be931b42d2..d89d5acd6e2a 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
> - qcom,msm8996-tsens
> - qcom,msm8998-tsens
> - qcom,sc7180-tsens
> + - qcom,sdm630-tsens
> - qcom,sdm845-tsens
> - const: qcom,tsens-v2
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index ea85f28032d2..92bf4ae6a590 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -566,6 +566,17 @@ anoc2_smmu: iommu@16c0000 {
> <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + tsens: thermal-sensor@10ae000 {
> + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
> + reg = <0x010ae000 0x1000>, /* TM */
> + <0x010ad000 0x1000>; /* SROT */
> + #qcom,sensors = <12>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
There should be 2 tsens controllers on this platform, the first at
0x010AA000, the other at 0x010AD000.
> tcsr_mutex_regs: syscon@1f40000 {
> compatible = "syscon";
> reg = <0x01f40000 0x20000>;
> --
> 2.27.0
>
