[PATCH 4/8] arm64: dts: qcom: sdm630: nile: Enable BLSP1_UART2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable the second UART interface used on this board.
Also convert the DT to use phandles instead of addresses
to make it coherent with other device trees.

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
 .../dts/qcom/sdm630-sony-xperia-nile.dtsi     | 50 ++++++++++---------
 1 file changed, 26 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 9ba359c848d0..de06fa809488 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -99,38 +99,40 @@ removed_region@85800000 {
 			no-map;
 		};
 	};
+};
 
-	soc {
-		sdhci@c0c4000 {
-			status = "okay";
+&blsp_i2c1 {
+	status = "okay";
 
-			mmc-ddr-1_8v;
-			/* SoMC Nile platform's eMMC doesn't support HS200 mode */
-			mmc-hs400-1_8v;
-		};
+	/* Synaptics touchscreen */
+};
 
-		i2c@c175000 {
-			status = "okay";
+&blsp_i2c2 {
+	status = "okay";
 
-			/* Synaptics touchscreen */
-		};
+	/* SMB1351 charger */
+};
 
-		i2c@c176000 {
-			status = "okay";
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
 
-			/* SMB1351 charger */
-		};
+&blsp_i2c6 {
+	status = "okay";
 
-		serial@c1af000 {
-			status = "okay";
-		};
+	/* NXP NFC */
+};
 
-		/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+&blsp1_uart2 {
+	status = "okay";
+};
 
-		i2c@c1b6000 {
-			status = "okay";
+&blsp2_uart1 {
+	status = "okay";
+};
 
-			/* NXP NFC */
-		};
-	};
+&sdhc_1 {
+	status = "okay";
+
+	mmc-ddr-1_8v;
+	/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+	mmc-hs400-1_8v;
 };
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux