Re: [PATCH 3/6] arm64: dts: qcom: sm8250: Add QMP AOSS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 22, 2020 at 03:27:44PM -0700, Bjorn Andersson wrote:
> Add a node for the QMP AOSS.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Thanks,
Mani

> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 74a7ca96177e..246e6f279aa8 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/clock/qcom,gcc-sm8250.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-aoss-qmp.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  
> @@ -989,6 +990,19 @@ pdc: interrupt-controller@b220000 {
>  			interrupt-controller;
>  		};
>  
> +		aoss_qmp: qmp@c300000 {
> +			compatible = "qcom,sm8250-aoss-qmp";
> +			reg = <0 0x0c300000 0 0x100000>;
> +			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
> +						     IPCC_MPROC_SIGNAL_GLINK_QMP
> +						     IRQ_TYPE_EDGE_RISING>;
> +			mboxes = <&ipcc IPCC_CLIENT_AOP
> +					IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +			#clock-cells = <0>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		spmi_bus: spmi@c440000 {
>  			compatible = "qcom,spmi-pmic-arb";
>  			reg = <0x0 0x0c440000 0x0 0x0001100>,
> -- 
> 2.26.2
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux