PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels,
rather than as a regulator. As such it's available from the rpmhpd as
the SM8250_LCX power domain.
Fixes: ec13d5c23a33 ("arm64: dts: qcom: sm8250-mtp: Add pm8150, pm8150l and pm8009")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 2fc9e7ff0060..63d259931c4d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -140,13 +140,6 @@ vreg_l10a_1p8: ldo10 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- vreg_l11a_0p75: ldo11 {
- regulator-name = "vreg_l11a_0p75";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
vreg_l12a_1p8: ldo12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
--
2.26.2
