Re: [PATCH v2 6/8] arm64: dts: qcom: sdm630: Add sdm630 dts file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 22 Jun 00:57 PDT 2020, Konrad Dybcio wrote:

> Add devicetree files for SDM630 SoC and its pin configuration.
> This commit adds basic nodes like cpu, psci and other required
> configuration for booting up from eMMC to the serial console.
> 
> Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm630-pins.dtsi | 268 ++++++
>  arch/arm64/boot/dts/qcom/sdm630.dtsi      | 991 ++++++++++++++++++++++
>  2 files changed, 1259 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
> new file mode 100644
> index 000000000000..55d80458f447
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi

Please just add these to the tlmm node directly in sdm630.dtsi. We used
to do it like this but are moving away from it.

> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> + &tlmm {
> +	blsp1_uart1_default: blsp1_uart1_default {

Please don't use '_' in the node name, i.e. this needs to be:
	blsp1_uart1_default: blsp1-uart1-default {

> +		config {

You can flatten this by skipping the "config" node and just put the
properties directly in the blsp1_uart1_default node.

[..]
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> new file mode 100644
> index 000000000000..4bf84c44068c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -0,0 +1,991 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-sdm660.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>

Please sort these alphabetically.

> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. SDM630";
> +	compatible = "qcom,sdm630";

These are expected to be overridden by the .dts anyways, so you
can/should omit them from here.

> +
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	memory {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the reg */
> +		reg = <0 0 0 0>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		wlan_msa_guard: wlan_msa_guard@85600000 {

As above, no '_' in node names.

> +			reg = <0x0 0x85600000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		wlan_msa_mem: wlan_msa_mem@85700000 {
> +			reg = <0x0 0x85700000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		qhee_code: qhee_code@85800000 {
> +			reg = <0x0 0x85800000 0x0 0x3700000>;
> +			no-map;
> +		};
> +
> +		smem_region: smem-mem@86000000 {
> +			reg = <0 0x86000000 0 0x200000>;
> +			no-map;
> +		};
> +
> +		tz_mem: memory@86200000 {
> +			reg = <0x0 0x86200000 0x0 0x3300000>;
> +			no-map;
> +		};
> +
> +		modem_fw_mem: modem_fw_region@8ac00000 {
> +			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
> +			no-map;
> +		};
> +
> +		adsp_fw_mem: adsp_fw_region@92a00000 {
> +			reg = <0x0 0x92a00000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_mba_mem: pil_mba_region@94800000 {
> +			reg = <0x0 0x94800000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		buffer_mem: buffer_region@94a00000 {
> +			reg = <0x0 0x94a00000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		venus_fw_mem: venus_fw_region@9f800000 {
> +			reg = <0x0 0x9f800000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		secure_region2: secure_region2@f7c00000 {
> +			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: adsp_region@f6000000 {
> +			reg = <0x0 0xf6000000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		qseecom_ta_mem: qseecom_ta_region@fec00000 {
> +			reg = <0x0 0xfec00000 0x0 0x1000000>;
> +			no-map;
> +		};
> +
> +		qseecom_mem: qseecom_region@f6800000 {
> +			reg = <0x0 0xf6800000 0x0 0x1400000>;
> +			no-map;
> +		};
> +
> +		secure_display_memory: secure_region@f5c00000 {
> +			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
> +			no-map;
> +		};
> +
> +		cont_splash_mem: cont_splash_region@9d400000 {
> +			reg = <0x0 0x9d400000 0x0 0x23ff000>;
> +			no-map;
> +		};
> +	};
> +
> +	clocks {
> +		xo_board: xo_board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";
> +		};
> +
> +		sleep_clk: sleep_clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32764>;
> +			clock-output-names = "sleep_clk";
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PERF_CPU_SLEEP_0
> +						&PERF_CPU_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_0
> +						&PERF_CLUSTER_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1126>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_1>;
> +			L2_1: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU1: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x101>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PERF_CPU_SLEEP_0
> +						&PERF_CPU_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_0
> +						&PERF_CLUSTER_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1126>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU2: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x102>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PERF_CPU_SLEEP_0
> +						&PERF_CPU_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_0
> +						&PERF_CLUSTER_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1126>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU3: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x103>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PERF_CPU_SLEEP_0
> +						&PERF_CPU_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_0
> +						&PERF_CLUSTER_SLEEP_1
> +						&PERF_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1126>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU4: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PWR_CPU_SLEEP_0
> +						&PWR_CPU_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_0
> +						&PWR_CLUSTER_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1024>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU5: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PWR_CPU_SLEEP_0
> +						&PWR_CPU_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_0
> +						&PWR_CLUSTER_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1024>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU6: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PWR_CPU_SLEEP_0
> +						&PWR_CPU_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_0
> +						&PWR_CLUSTER_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1024>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU7: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&PWR_CPU_SLEEP_0
> +						&PWR_CPU_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_0
> +						&PWR_CLUSTER_SLEEP_1
> +						&PWR_CLUSTER_SLEEP_2>;
> +			capacity-dmips-mhz = <1024>;
> +			#cooling-cells = <2>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU4>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU5>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU6>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "pwr-retention";
> +				arm,psci-suspend-param = <0x40000002>;
> +				entry-latency-us = <338>;
> +				exit-latency-us = <423>;
> +				min-residency-us = <200>;
> +			};
> +
> +			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "pwr-power-collapse";
> +				arm,psci-suspend-param = <0x40000003>;
> +				entry-latency-us = <515>;
> +				exit-latency-us = <1821>;
> +				min-residency-us = <1000>;
> +				local-timer-stop;
> +			};
> +
> +			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "perf-retention";
> +				arm,psci-suspend-param = <0x40000002>;
> +				entry-latency-us = <154>;
> +				exit-latency-us = <87>;
> +				min-residency-us = <200>;
> +			};
> +
> +			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "perf-power-collapse";
> +				arm,psci-suspend-param = <0x40000003>;
> +				entry-latency-us = <262>;
> +				exit-latency-us = <301>;
> +				min-residency-us = <1000>;
> +				local-timer-stop;
> +			};
> +
> +			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "pwr-cluster-dynamic-retention";
> +				arm,psci-suspend-param = <0x400000F2>;
> +				entry-latency-us = <284>;
> +				exit-latency-us = <384>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +
> +			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "pwr-cluster-retention";
> +				arm,psci-suspend-param = <0x400000F3>;
> +				entry-latency-us = <338>;
> +				exit-latency-us = <423>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +
> +			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "pwr-cluster-retention";
> +				arm,psci-suspend-param = <0x400000F4>;
> +				entry-latency-us = <515>;
> +				exit-latency-us = <1821>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +
> +			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "perf-cluster-dynamic-retention";
> +				arm,psci-suspend-param = <0x400000F2>;
> +				entry-latency-us = <272>;
> +				exit-latency-us = <329>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +
> +			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "perf-cluster-retention";
> +				arm,psci-suspend-param = <0x400000F3>;
> +				entry-latency-us = <332>;
> +				exit-latency-us = <368>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +
> +			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "perf-cluster-retention";
> +				arm,psci-suspend-param = <0x400000F4>;
> +				entry-latency-us = <545>;
> +				exit-latency-us = <1609>;
> +				min-residency-us = <9987>;
> +				local-timer-stop;
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm {
> +			compatible = "qcom,scm-msm8998", "qcom,scm";
> +		};
> +	};
> +
> +	tcsr_mutex: hwlock {
> +		compatible = "qcom,tcsr-mutex";
> +		syscon = <&tcsr_mutex_block 0 0x1000>;
> +		#hwlock-cells = <1>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	rpm-glink {
> +		compatible = "qcom,glink-rpm";
> +
> +		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		mboxes = <&apcs_glb 0>;
> +
> +		rpm_requests: rpm-requests {
> +			compatible = "qcom,rpm-sdm660";
> +			qcom,glink-channels = "rpm_requests";
> +
> +			rpmcc: clock-controller {
> +				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
> +				#clock-cells = <1>;
> +			};
> +		};
> +	};
> +
> +	smem: smem {
> +		compatible = "qcom,smem";
> +		memory-region = <&smem_region>;
> +		hwlocks = <&tcsr_mutex 3>;
> +	};
> +
> +	tcsr_mutex_block: syscon@1f40000 {
> +		compatible = "syscon";
> +		reg = <0 0x1f40000 0 0x20000>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 1 0xf08>,
> +				 <GIC_PPI 2 0xf08>,
> +				 <GIC_PPI 3 0xf08>,
> +				 <GIC_PPI 0 0xf08>;
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@100000 {
> +			compatible = "qcom,gcc-sdm630";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			reg = <0x100000 0x94000>;

Please pad the address to 8 digits to make it faster to check the sort
order of these.

And then please sort your nodes based on address (and then name for
nodes without reg).

> +
> +			clock-names = "xo", "sleep_clk";
> +			clocks = <&xo_board>,
> +					<&sleep_clk>;
> +		};
> +
> +		rng: rng@793000 {
> +			compatible = "qcom,prng-ee";
> +			reg = <0x793000 0x1000>;
> +			clocks = <&gcc GCC_PRNG_AHB_CLK>;
> +			clock-names = "core";
> +		};
> +
> +		intc: interrupt-controller@17a00000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x17a00000 0x10000>,	   /* GICD */
> +				  <0x17b00000 0x100000>;	  /* GICR * 8 */
> +			#interrupt-cells = <3>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		restart@10ac000 {
> +			compatible = "qcom,pshold";
> +			reg = <0x10ac000 0x4>;
> +		};
> +
> +		tcsr_mutex_regs: syscon@1f40000 {
> +			compatible = "syscon";
> +			reg = <0x01f40000 0x20000>;
> +		};
> +
> +		rpm_msg_ram: memory@778000 {
> +			compatible = "qcom,rpm-msg-ram";
> +			reg = <0x778000 0x7000>;
> +		};
> +
> +		qfprom: qfprom@780000 {
> +			compatible = "qcom,qfprom";
> +			reg = <0x780000 0x621c>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +
> +		apcs_glb: mailbox@17911000 {
> +			compatible = "qcom,msm8998-apcs-hmss-global";

Please make sure there's a proper compatible for this.

> +			reg = <0x17911000 0x1000>;
> +
> +			#mbox-cells = <1>;
> +		};
> +
> +		tlmm: pinctrl@3000000 {
> +			compatible = "qcom,sdm630-pinctrl";
> +			reg = <0x3000000 0xc00000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <0x2>;
> +			interrupt-controller;
> +			#interrupt-cells = <0x2>;
> +		};
> +
> +		spmi_bus: spmi@800f000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg =	<0x0800f000 0x1000>,
> +				<0x08400000 0x1000000>,
> +				<0x09400000 0x1000000>,
> +				<0x0a400000 0x220000>,
> +				<0x0800a000 0x3000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +			cell-index = <0>;
> +		};
> +
> +		timer@17920000 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x17920000 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17921000 {
> +				frame-number = <0>;
> +				interrupts = <0 8 0x4>,
> +						<0 7 0x4>;
> +				reg = <0x17921000 0x1000>,
> +					<0x17922000 0x1000>;
> +			};
> +
> +			frame@17923000 {
> +				frame-number = <1>;
> +				interrupts = <0 9 0x4>;
> +				reg = <0x17923000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17924000 {
> +				frame-number = <2>;
> +				interrupts = <0 10 0x4>;
> +				reg = <0x17924000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17925000 {
> +				frame-number = <3>;
> +				interrupts = <0 11 0x4>;
> +				reg = <0x17925000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17926000 {
> +				frame-number = <4>;
> +				interrupts = <0 12 0x4>;
> +				reg = <0x17926000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17927000 {
> +				frame-number = <5>;
> +				interrupts = <0 13 0x4>;
> +				reg = <0x17927000 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17928000 {
> +				frame-number = <6>;
> +				interrupts = <0 14 0x4>;
> +				reg = <0x17928000 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		sdhc_1: sdhci@c0c4000 {
> +			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0xc0c4000 0x1000>,
> +				<0xc0c5000 0x1000>;
> +			reg-names = "hc", "cqhci";
> +
> +			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> +					<&gcc GCC_SDCC1_AHB_CLK>,
> +					<&xo_board>;
> +			clock-names = "core", "iface", "xo";
> +
> +			pinctrl-names = "default", "sleep";
> +			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
> +			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
> +
> +			bus-width = <8>;
> +			non-removable;
> +
> +			mmc-ddr-1_8v;
> +			mmc-hs200-1_8v;
> +			mmc-hs400-1_8v;

These are board properties, consider pushing them out to the individual
.dts files.

> +
> +			status = "disabled";
> +		};
> +

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux