Add base DTS files for pm660(l) along with GPIOs, power-on and
rtc nodes.
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm660.dtsi | 60 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm660l.dtsi | 45 +++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000000..94eca5a1cf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+ pmic@0 {
+ compatible = "qcom,pm660", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pon: pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
+ pm660_gpios: gpios@c000 {
+ compatible = "qcom,pm660-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000000..6de56b220c56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+ pmic@2 {
+ compatible = "qcom,pm660l", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm660l_gpios: gpios@c000 {
+ compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xca 0x0 IRQ_TYPE_NONE>,
+ <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmic@3 {
+ compatible = "qcom,pm660l", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
\ No newline at end of file
--
2.27.0
