[PATCH 11/21] arm64: dts: qcom: msm8994: Add SDHCI1 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable support for SDHCI on msm8994-based devices.

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index f623f7e08994..f363b678c3b3 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -279,6 +279,33 @@ apcs: syscon@f900d000 {
 			compatible = "syscon";
 			reg = <0xf900d000 0x2000>;
 		};
+
+		sdhc1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				<&gcc GCC_SDCC1_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
+							&sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
+							&sdc1_rclk_off>;
+
+			regulator-always-on;
+			bus-width = <8>;
+			mmc-hs400-1_8v;
+			non-removable;
+			status = "disabled";
+		};
 	};
 
 	memory {
-- 
2.27.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux