Re: [PATCH v6 5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
Subject: Re: [PATCH v6 5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3
From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Date: Mon, 15 Jun 2020 10:32:48 -0700
Cc: viresh.kumar@xxxxxxxxxx, sboyd@xxxxxxxxxx, georgi.djakov@xxxxxxxxxx, saravanak@xxxxxxxxxx, nm@xxxxxx, bjorn.andersson@xxxxxxxxxx, agross@xxxxxxxxxx, rjw@xxxxxxxxxxxxx, linux-arm-msm@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-pm@xxxxxxxxxxxxxxx, dianders@xxxxxxxxxxxx, vincent.guittot@xxxxxxxxxx, amit.kucheria@xxxxxxxxxx, lukasz.luba@xxxxxxx, sudeep.holla@xxxxxxx, smasetty@xxxxxxxxxxxxxx
In-reply-to: <20200605213332.609-6-sibis@codeaurora.org>
References: <20200605213332.609-1-sibis@codeaurora.org> <20200605213332.609-6-sibis@codeaurora.org>

On Sat, Jun 06, 2020 at 03:03:32AM +0530, Sibi Sankar wrote:
> Disable fast switch when the opp-tables required for scaling DDR/L3
> are populated.
> 
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>

not sure a separate patch is needed for this, but anyway:

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

References:
- [PATCH v6 0/5] DDR/L3 Scaling support on SDM845 and SC7180 SoCs
  - From: Sibi Sankar
- [PATCH v6 5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3
  - From: Sibi Sankar

Prev by Date: Re: [PATCH v6 4/5] cpufreq: qcom: Update the bandwidth levels on frequency change
Next by Date: Re: [PATCH 4/4] arm64: dts: qcom: sm8150: Add Coresight support
Previous by thread: [PATCH v6 5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3
Next by thread: Re: [PATCH v6 0/5] DDR/L3 Scaling support on SDM845 and SC7180 SoCs
Index(es):
- Date
- Thread

[Index of Archives] [Linux ARM Kernel] [Linux ARM] [Linux Omap] [Fedora ARM] [Linux for Sparc] [IETF Annouce] [Security] [Bugtraq] [Linux MIPS] [ECOS] [Asterisk Internet PBX] [Linux API]