Re: [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

Would you be able to review/ack this QSPI patch, you have already acked "QUP SPI" patch from the series "[Patch V7 RESEND 4/7]"

Putting a gentle reminder in-case this patch is missed.

Regards,

Akash

On 6/9/2020 11:26 AM, Akash Asthana wrote:
Get the interconnect paths for QSPI device and vote according to the
current bus speed of the driver.

Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in V2:
  - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
    path handle
  - As per Matthias comment, added error handling for icc_set_bw call

Changes in V3:
  - No Change.

Changes in V4:
  - As per Mark's comment move peak_bw guess as twice of avg_bw if
    nothing mentioned explicitly to ICC core.

Changes in V5:
  - Add icc_enable/disable to power on/off call.
  - Save some non-zero avg/peak value to ICC core by calling geni_icc_set_bw
    from probe so that when resume/icc_enable is called NOC are running at
    some non-zero value.

Changes in V6:
  - As per Matthias's comment made print statement consistent across driver

Changes in V7:
  - As per Matthias's comment removed usage of peak_bw variable because we don't
    have explicit peak requirement, we were voting peak = avg and this can be
    tracked using single variable for avg bw.
  - As per Matthias's comment improved print log.

Changes in Resend V7:
  - As per Matthias comment removed "unsigned int avg_bw_cpu" from
    struct qcom_qspi as we are using that variable only once.

  drivers/spi/spi-qcom-qspi.c | 56 ++++++++++++++++++++++++++++++++++++++++++++-
  1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index 3c4f83b..b5b4cf6 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -2,6 +2,7 @@
  // Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
#include <linux/clk.h>
+#include <linux/interconnect.h>
  #include <linux/interrupt.h>
  #include <linux/io.h>
  #include <linux/module.h>
@@ -139,7 +140,8 @@ struct qcom_qspi {
  	struct device *dev;
  	struct clk_bulk_data *clks;
  	struct qspi_xfer xfer;
-	/* Lock to protect xfer and IRQ accessed registers */
+	struct icc_path *icc_path_cpu_to_qspi;
+	/* Lock to protect data accessed by IRQs */
  	spinlock_t lock;
  };
@@ -229,6 +231,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
  	int ret;
  	unsigned long speed_hz;
  	unsigned long flags;
+	unsigned int avg_bw_cpu;
speed_hz = slv->max_speed_hz;
  	if (xfer->speed_hz)
@@ -241,6 +244,18 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
  		return ret;
  	}
+ /*
+	 * Set BW quota for CPU as driver supports FIFO mode only.
+	 * We don't have explicit peak requirement so keep it equal to avg_bw.
+	 */
+	avg_bw_cpu = Bps_to_icc(speed_hz);
+	ret = icc_set_bw(ctrl->icc_path_cpu_to_qspi, avg_bw_cpu, avg_bw_cpu);
+	if (ret) {
+		dev_err(ctrl->dev, "%s: ICC BW voting failed for cpu: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
  	spin_lock_irqsave(&ctrl->lock, flags);
/* We are half duplex, so either rx or tx will be set */
@@ -458,6 +473,29 @@ static int qcom_qspi_probe(struct platform_device *pdev)
  	if (ret)
  		goto exit_probe_master_put;
+ ctrl->icc_path_cpu_to_qspi = devm_of_icc_get(dev, "qspi-config");
+	if (IS_ERR(ctrl->icc_path_cpu_to_qspi)) {
+		ret = PTR_ERR(ctrl->icc_path_cpu_to_qspi);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get cpu path: %d\n", ret);
+		goto exit_probe_master_put;
+	}
+	/* Set BW vote for register access */
+	ret = icc_set_bw(ctrl->icc_path_cpu_to_qspi, Bps_to_icc(1000),
+				Bps_to_icc(1000));
+	if (ret) {
+		dev_err(ctrl->dev, "%s: ICC BW voting failed for cpu: %d\n",
+				__func__, ret);
+		goto exit_probe_master_put;
+	}
+
+	ret = icc_disable(ctrl->icc_path_cpu_to_qspi);
+	if (ret) {
+		dev_err(ctrl->dev, "%s: ICC disable failed for cpu: %d\n",
+				__func__, ret);
+		goto exit_probe_master_put;
+	}
+
  	ret = platform_get_irq(pdev, 0);
  	if (ret < 0)
  		goto exit_probe_master_put;
@@ -511,9 +549,17 @@ static int __maybe_unused qcom_qspi_runtime_suspend(struct device *dev)
  {
  	struct spi_master *master = dev_get_drvdata(dev);
  	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+	int ret;
clk_bulk_disable_unprepare(QSPI_NUM_CLKS, ctrl->clks); + ret = icc_disable(ctrl->icc_path_cpu_to_qspi);
+	if (ret) {
+		dev_err_ratelimited(ctrl->dev, "%s: ICC disable failed for cpu: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
  	return 0;
  }
@@ -521,6 +567,14 @@ static int __maybe_unused qcom_qspi_runtime_resume(struct device *dev)
  {
  	struct spi_master *master = dev_get_drvdata(dev);
  	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+	int ret;
+
+	ret = icc_enable(ctrl->icc_path_cpu_to_qspi);
+	if (ret) {
+		dev_err_ratelimited(ctrl->dev, "%s: ICC enable failed for cpu: %d\n",
+			__func__, ret);
+		return ret;
+	}
return clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
  }

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux