[PATCH v2 6/6] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B.  This will provide the VBUS source to connected
peripherals.

Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8150b.dtsi   | 6 ++++++
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 7 +++++++
 2 files changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index ec44a8bc2f84..b7274d9d7341 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -22,6 +22,12 @@ power-on@800 {
 			status = "disabled";
 		};
 
+		qcom,dcdc@1100 {
+			compatible = "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		qcom,typec@1500 {
 			compatible = "qcom,pm8150b-usb-typec";
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 6c6325c3af59..3845d19893eb 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -426,6 +426,13 @@ &usb_1 {
 	status = "okay";
 };
 
+&spmi_bus {
+	pmic@2 {
+		qcom,dcdc@1100 {
+			status = "okay";
+		};
+};
+
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux