Re: [RFC PATCH v4 4/4] scsi: ufs-qcom: add Inline Crypto Engine support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/8/20 3:25 PM, Eric Biggers wrote:
> On Fri, May 08, 2020 at 03:18:23PM -0500, Steev Klimaszewski wrote:
>> On 5/7/20 1:08 PM, Eric Biggers wrote:
>>> On Thu, May 07, 2020 at 11:04:35AM -0700, Eric Biggers wrote:
>>>> Hi Thara,
>>>>
>>>> On Thu, May 07, 2020 at 08:36:58AM -0400, Thara Gopinath wrote:
>>>>> On 5/1/20 12:51 AM, Eric Biggers wrote:
>>>>>> From: Eric Biggers <ebiggers@xxxxxxxxxx>
>>>>>>
>>>>>> Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.
>>>>>>
>>>>>> The standards-compliant parts, such as querying the crypto capabilities
>>>>>> and enabling crypto for individual UFS requests, are already handled by
>>>>>> ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
>>>>>> However, ICE requires vendor-specific init, enable, and resume logic,
>>>>>> and it requires that keys be programmed and evicted by vendor-specific
>>>>>> SMC calls.  Make the ufs-qcom driver handle these details.
>>>>>>
>>>>>> I tested this on Dragonboard 845c, which is a publicly available
>>>>>> development board that uses the Snapdragon 845 SoC and runs the upstream
>>>>>> Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
>>>>>> phones.  This testing included (among other things) verifying that the
>>>>>> expected ciphertext was produced, both manually using ext4 encryption
>>>>>> and automatically using a block layer self-test I've written.
>>>>> Hello Eric,
>>>>>
>>>>> I am interested in testing out this series on 845, 855 and if possile on 865
>>>>> platforms. Can you give me some more details about your testing please.
>>>>>
>>>> Great!  You can test this with fscrypt, a.k.a. ext4 or f2fs encryption.
>>>>
>>>> A basic manual test would be:
>>>>
>>>> 1. Build a kernel with:
>>>>
>>>> 	CONFIG_BLK_INLINE_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION=y
>>>> 	CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
>>> Sorry, I forgot: 'CONFIG_SCSI_UFS_CRYPTO=y' is needed too.
>>>
>>> - Eric
>>
> The original patchset is at
> https://lkml.kernel.org/r/20200430115959.238073-1-satyat@xxxxxxxxxx/
>
> Yes, v12 is the latest version, and yes that's a bug.  The export needs double
> underscores.  Satya will fix it when he sends out v13.
>
> - Eric

Hi Eric,


I've been testing this on a Lenovo Yoga C630 installed to a partition on
the UFS drive, using a 5.7(ish) kernel with fscrypt/inline-encryption
and a few patches on top that are still in flux for c630 support.  The
sources I use can be found at
https://github.com/steev/linux/tree/linux-5.7.y-c630-fscrypt and the
config I'm using can be found at
https://dev.gentoo.org/~steev/files/lenovo-yoga-c630-5.7.0-rc7-fs-inline-encryption.config.


Everything seems to be working here.  I've run the tests you've
mentioned and haven't seen any issues.


-- Steev




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux