Re: [PATCH 1/3] usb: typec: Add QCOM PMIC typec detection driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/10/2020 12:37 PM, Bjorn Andersson wrote:
>> along with USB_BASE @ 0x1300, is it ok to allow this driver to access
>> registers outside of its 'reg' base (0x1500 according to the DT
>> bindings)?
>>
> 
> Depending on how entangled a future driver for the charger blocks would
> be one could either just upstream a dcdc regulator driver to control
> vbus today, or a "lite version" of a charging driver exposing just the
> vbus regulator.
> 
> Either way I would prefer this over poking the register directly from
> this driver, as it will make it tricky to migrate to a proper charger
> driver later.
> 
> Regards,
> Bjorn
> 

Hi Bjorn/Jack,

I have removed the need for referencing other base addresses other than
the type C block within the  driver, and have moved the DCDC set to be
handled by another regulator driver, which solely controls the vbus
output.  The type C driver will control the vbus output using the
regulator APIs.  Thanks for the input.

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux