Add dts nodes for apps_smmu and USB for both sm8150 and sm8250. Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a few changes. Notably, the HDK865 dts has regulator config changed a bit based on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150). V2 changes: * Added two patches for sm8150 and sm8250 iommu compatibles * Changed apps_smmu node patches to use new compatibles * Updated commit messages for apps_smmu patches to be more correct * Updated HDK dts patches based on Bjorn's comments Jonathan Marek (8): dt-bindings: arm-smmu: Add sm8150 and sm8250 compatible strings iommu: arm-smmu-impl: Use qcom impl for sm8150 and sm8250 compatibles arm64: dts: qcom: sm8150: add apps_smmu node arm64: dts: qcom: sm8250: add apps_smmu node arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes arm64: dts: qcom: sm8250: Add USB and PHY device nodes arm64: dts: qcom: add sm8150 hdk dts arm64: dts: qcom: add sm8250 hdk dts .../devicetree/bindings/iommu/arm,smmu.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 463 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++ arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++ drivers/iommu/arm-smmu-impl.c | 4 +- 7 files changed, 1391 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts -- 2.26.1
