[PATCH 5/7] arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 41 +++++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 43 +++++++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 43 +++++++++++++++++++++++++--
 3 files changed, 119 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index c0b197458665..fee2db42f4cb 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -30,6 +30,15 @@ pwrkey {
 			};
 		};
 
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm8150_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -38,8 +47,6 @@ pm8150_adc: adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
@@ -85,3 +92,33 @@ pmic@1 {
 		#size-cells = <0>;
 	};
 };
+
+&thermal_zones {
+	pm8150_temp {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8150_temp>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 40b5d75a4a1d..e93d16f2d1e0 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -22,7 +22,16 @@ power-on@800 {
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +39,6 @@ adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
@@ -74,3 +81,33 @@ pmic@3 {
 		#size-cells = <0>;
 	};
 };
+
+&thermal_zones {
+	pm8150b_temp {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8150b_temp>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index cf05e0685d10..1edf87c95a27 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -22,7 +22,16 @@ power-on@800 {
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +39,6 @@ adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
@@ -68,3 +75,33 @@ pmic@5 {
 		#size-cells = <0>;
 	};
 };
+
+&thermal_zones {
+	pm8150l_temp {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8150l_temp>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+		};
+
+	};
+};
-- 
2.26.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux