[PATCH 4/7] arm64: dts: qcom: sm8x50: add empty thermal zone nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add empty thermal_zone nodes. They will be populated by PMIC dtsi files,
describing thermal sensors and trip points for zones handled by PMICs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 141c21dfa68c..869a54352d77 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -857,6 +857,9 @@ cpufreq_hw: cpufreq@18323000 {
 		};
 	};
 
+	thermal_zones: thermal-zones {
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 9dd27aecdfda..972d8e04c8a2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1736,6 +1736,9 @@ cpufreq_hw: cpufreq@18591000 {
 		};
 	};
 
+	thermal_zones: thermal-zones {
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-- 
2.26.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux