Re: [PATCH V1] mmc: sdhci-msm: Clear tuning done flag while hs400 tuning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 28 May 2020 at 17:14, Veerabhadrarao Badiganti
<vbadigan@xxxxxxxxxxxxxx> wrote:
>
> Clear tuning_done flag while executing tuning to ensure vendor
> specific HS400 settings are applied properly when the controller
> is re-initialized in HS400 mode.
>
> Without this, re-initialization of the qcom SDHC in HS400 mode fails
> while resuming the driver from runtime-suspend or system-suspend.
>
> Fixes: ff06ce4 ("mmc: sdhci-msm: Add HS400 platform support")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe

> ---
>  drivers/mmc/host/sdhci-msm.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 95cd973..b277dd7 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -1174,6 +1174,12 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>         msm_host->use_cdr = true;
>
>         /*
> +        * Clear tuning_done flag before tuning to ensure proper
> +        * HS400 settings.
> +        */
> +       msm_host->tuning_done = 0;
> +
> +       /*
>          * For HS400 tuning in HS200 timing requires:
>          * - select MCLK/2 in VENDOR_SPEC
>          * - program MCLK to 400MHz (or nearest supported) in GCC
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux