On Sat 23 May 06:12 PDT 2020, Jonathan Marek wrote:
> Use the dt-bindings defines for qupv3_id_1 node's clocks.
>
Applied
Thanks,
Bjorn
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 9c210fbac65e..04c9c215ffcd 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0x0 0x00ac0000 0x0 0x6000>;
> clock-names = "m-ahb", "s-ahb";
> - clocks = <&gcc 133>, <&gcc 134>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -302,7 +303,7 @@ uart2: serial@a90000 {
> compatible = "qcom,geni-debug-uart";
> reg = <0x0 0x00a90000 0x0 0x4000>;
> clock-names = "se";
> - clocks = <&gcc 113>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> --
> 2.26.1
>
