Re: [PATCH 08/10] clk: qcom: Add graphics clock controller driver for SM8250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 25 May 02:47 PDT 2020, Sai Prakash Ranjan wrote:

> Hi Jonathan,
> 
> On 2020-05-25 02:36, Jonathan Marek wrote:
> > Add support for the graphics clock controller found on SM8250
> > based devices. This would allow graphics drivers to probe and
> > control their clocks.
> > 
> > This is copied from the downstream kernel, adapted for upstream.
> > For example, GDSCs have been added.
> > 
> > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> 
> Since this is taken from downstream, maintain the original author's
> signed-off and add yourself as the co-developer if you have done
> any modifications. Same applies to all other patches.
> 

I disagree with this.

As expressed in the commit message, this patch is based on the
downstream driver, not the individual patch.  As such, the _patch_ is
prepared by Jonathan and by his Signed-off-by certifies the origin of
the contribution per section 11.a or 11.b of submitting-patches.rst.



Regarding co-developed-by; this should not be used when "forwarding" an
existing patch. Per section 11.c the contributor should add their
Signed-off-by to certify the origin of the patch. Any modifications
should be documented in immediately proceeding the s-o-b, as described
later in section 11.

Thanks,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux