Re: [PATCH 1/2] dt-bindings: phy-qcom-usb-hs-phy: Add qcom,enable-vbus-pullup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 21 May 2020 01:50:30 +0100, Bryan O'Donoghue wrote:
> This patch adds a dt-binding for qcom,enable-vbus-pullup. The binding
> qcom,enable-vbus-pullup tells the HS USB PHY driver whether it should set
> and unset the internal VBUS pullup bits when starting/stopping the USB PHY.
> 
> Setting the pullup bits is something you want to do if you have not routed
> VBUS to a GPIO on the SoC and thus cannot use extcon with the current
> switching logic in the PHY.
> 
> Cc: Andy Gross <agross@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux