This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs. These regulators provide positive and/or negative boost power supplies for LCD/LED display panels connected to the SoC. This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs. Changes from v2: - Review comments from v2 - Moved the poll-to-check-enabled functionality to regulator core. - Used more core features to simplify enable/disable functions. - Moved the devicetree binding to yaml. - Updated interrupt-names and simplified handling. Changes from v1: - Incorporated review comments from v1 - Changed from virtual-regulator based handling to individual regulator based handling. - Reworked the core to merge most of enable/disable functions, combine the regulator_ops into one and allow for future variations. - is_enabled() is now _really_ is_enabled() - Simplified the SC interrupt handling - use regmap_read_poll_timeout, REGULATOR_EVENT_OVER_CURRENT handling and notification to clients. Nisha Kumari (4): dt-bindings: regulator: Add labibb regulator arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators regulator: qcom: Add labibb driver regulator: qcom: labibb: Add SC interrupt handling Sumit Semwal (1): regulator: Allow regulators to verify enabled during enable() .../regulator/qcom-labibb-regulator.yaml | 63 ++++ arch/arm64/boot/dts/qcom/pmi8998.dtsi | 14 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/core.c | 28 ++ drivers/regulator/qcom-labibb-regulator.c | 316 ++++++++++++++++++ include/linux/regulator/driver.h | 5 + 7 files changed, 437 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml create mode 100644 drivers/regulator/qcom-labibb-regulator.c -- 2.26.2
