On Wed, 6 May 2020 at 08:01, Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> Some rensas controller like uPD720201 and uPD720202 need firmware to be
> loaded. Add these devices in pci table and invoke renesas firmware loader
> functions to check and load the firmware into device memory when
> required.
>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Hi, I got a build error when I built an arm64 allmodconfig kernel.
building obj-arm64-next-20200518
aarch64-linux-gnu-ld: drivers/usb/host/xhci-pci.o: in function
`xhci_pci_remove':
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:411:
undefined reference to `renesas_xhci_pci_exit'
aarch64-linux-gnu-ld:
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:411:(.text+0xd8):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol
`renesas_xhci_pci_exit'
aarch64-linux-gnu-ld: drivers/usb/host/xhci-pci.o: in function `xhci_pci_probe':
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:345:
undefined reference to `renesas_xhci_check_request_fw'
aarch64-linux-gnu-ld:
/srv/src/kernel/next/obj-arm64-next-20200518/../drivers/usb/host/xhci-pci.c:345:(.text+0x2298):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol
`renesas_xhci_check_request_fw'
make[1]: *** [/srv/src/kernel/next/Makefile:1126: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:185: __sub-make] Error 2
make: Target 'Image' not remade because of errors.
When I reverted this patch from todays next tag next-20200518 I
managed to build.
Cheers,
Anders
> ---
> drivers/usb/host/xhci-pci.c | 35 ++++++++++++++++++++++++++++++++++-
> drivers/usb/host/xhci.h | 1 +
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index b6c2f5c530e3..ef513c2fb843 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -15,6 +15,7 @@
>
> #include "xhci.h"
> #include "xhci-trace.h"
> +#include "xhci-pci.h"
>
> #define SSIC_PORT_NUM 2
> #define SSIC_PORT_CFG2 0x880c
> @@ -87,7 +88,16 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
>
> static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> {
> - struct pci_dev *pdev = to_pci_dev(dev);
> + struct pci_dev *pdev = to_pci_dev(dev);
> + struct xhci_driver_data *driver_data;
> + const struct pci_device_id *id;
> +
> + id = pci_match_id(pdev->driver->id_table, pdev);
> +
> + if (id && id->driver_data) {
> + driver_data = (struct xhci_driver_data *)id->driver_data;
> + xhci->quirks |= driver_data->quirks;
> + }
>
> /* Look for vendor-specific quirks */
> if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
> @@ -328,6 +338,14 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> int retval;
> struct xhci_hcd *xhci;
> struct usb_hcd *hcd;
> + struct xhci_driver_data *driver_data;
> +
> + driver_data = (struct xhci_driver_data *)id->driver_data;
> + if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> + retval = renesas_xhci_check_request_fw(dev, id);
> + if (retval)
> + return retval;
> + }
>
> /* Prevent runtime suspending between USB-2 and USB-3 initialization */
> pm_runtime_get_noresume(&dev->dev);
> @@ -389,6 +407,9 @@ static void xhci_pci_remove(struct pci_dev *dev)
> struct xhci_hcd *xhci;
>
> xhci = hcd_to_xhci(pci_get_drvdata(dev));
> + if (xhci->quirks & XHCI_RENESAS_FW_QUIRK)
> + renesas_xhci_pci_exit(dev);
> +
> xhci->xhc_state |= XHCI_STATE_REMOVING;
>
> if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
> @@ -540,14 +561,26 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
>
> /*-------------------------------------------------------------------------*/
>
> +static const struct xhci_driver_data reneses_data = {
> + .quirks = XHCI_RENESAS_FW_QUIRK,
> + .firmware = "renesas_usb_fw.mem",
> +};
> +
> /* PCI driver selection metadata; PCI hotplugging uses this */
> static const struct pci_device_id pci_ids[] = {
> + { PCI_DEVICE(0x1912, 0x0014),
> + .driver_data = (unsigned long)&reneses_data,
> + },
> + { PCI_DEVICE(0x1912, 0x0015),
> + .driver_data = (unsigned long)&reneses_data,
> + },
> /* handle any USB 3.0 xHCI controller */
> { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
> },
> { /* end: all zeroes */ }
> };
> MODULE_DEVICE_TABLE(pci, pci_ids);
> +MODULE_FIRMWARE("renesas_usb_fw.mem");
>
> /* pci driver glue; this is a "new style" PCI driver module */
> static struct pci_driver xhci_pci_driver = {
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 3289bb516201..4047363c7423 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1873,6 +1873,7 @@ struct xhci_hcd {
> #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
> #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
> #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
> +#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
>
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> --
> 2.25.4
>
