Re: [PATCH v1 2/6] arm/smmu: Add auxiliary domain support for arm-smmuv2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 18, 2020 at 8:18 AM Will Deacon <will@xxxxxxxxxx> wrote:
>
> On Wed, Mar 18, 2020 at 04:43:07PM -0700, Rob Clark wrote:
> > On Wed, Mar 18, 2020 at 3:48 PM Will Deacon <will@xxxxxxxxxx> wrote:
> > > On Tue, Jan 28, 2020 at 03:16:06PM -0700, Jordan Crouse wrote:
> > > > Support auxiliary domains for arm-smmu-v2 to initialize and support
> > > > multiple pagetables for a single SMMU context bank. Since the smmu-v2
> > > > hardware doesn't have any built in support for switching the pagetable
> > > > base it is left as an exercise to the caller to actually use the pagetable.
> > > >
> > > > Aux domains are supported if split pagetable (TTBR1) support has been
> > > > enabled on the master domain.  Each auxiliary domain will reuse the
> > > > configuration of the master domain. By default the a domain with TTBR1
> > > > support will have the TTBR0 region disabled so the first attached aux
> > > > domain will enable the TTBR0 region in the hardware and conversely the
> > > > last domain to be detached will disable TTBR0 translations.  All subsequent
> > > > auxiliary domains create a pagetable but not touch the hardware.
> > > >
> > > > The leaf driver will be able to query the physical address of the
> > > > pagetable with the DOMAIN_ATTR_PTBASE attribute so that it can use the
> > > > address with whatever means it has to switch the pagetable base.
> > > >
> > > > Following is a pseudo code example of how a domain can be created
> > > >
> > > >  /* Check to see if aux domains are supported */
> > > >  if (iommu_dev_has_feature(dev, IOMMU_DEV_FEAT_AUX)) {
> > > >        iommu = iommu_domain_alloc(...);
> > > >
> > > >        if (iommu_aux_attach_device(domain, dev))
> > > >                return FAIL;
> > > >
> > > >       /* Save the base address of the pagetable for use by the driver
> > > >       iommu_domain_get_attr(domain, DOMAIN_ATTR_PTBASE, &ptbase);
> > > >  }
> > >
> > > I'm not really understanding what the pagetable base gets used for here and,
> > > to be honest with you, the whole thing feels like a huge layering violation
> > > with the way things are structured today. Why doesn't the caller just
> > > interface with io-pgtable directly?
> > >
> > > Finally, if we need to support context-switching TTBR0 for a live domain
> > > then that code really needs to live inside the SMMU driver because the
> > > ASID and TLB management necessary to do that safely doesn't belong anywhere
> > > else.
> >
> > We do in fact need live domain switching, that is really the whole
> > point.  The GPU CP (command processor/parser) is directly updating
> > TTBR0 and triggering TLB flush, asynchronously from the CPU.
> >
> > And I think the answer about ASID is easy (on current hw).. it must be zero[*].
>
> Using ASID zero is really bad, because it means that you will end up sharing
> TLB entries with whichever device is using context bank 0.
>
> Is the SMMU only used by the GPU in your SoC?
>

yes, the snapdragon SoCs have two SMMU instances, one used by the GPU,
where ASID0/cb0 is the gpu itself, and another cb is the GMU
(basically power control for the gpu), and the second SMMU is
everything else.

BR,
-R



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux