[PATCH] phy: qcom-qmp: Ensure register indirection arrays initialized

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's possible that struct qmp_phy_cfg->regs references an array that is
smaller than the possible register lookups that is going to be
performed, with the resulting out-of-bounds read resulting in undefined
behavior.

One such example is when during qcom_qmp_phy_com_init() performs a
qphy_setbits() on entry QPHY_PCS_POWER_DOWN_CONTROL (i.e. 17) with
msm8996_ufsphy_regs_layout only being 12 entries long.

Solve this by inflating all "regs_layout" arrays to ensure that any
remaining entries are zero-initialized, as expected by the code.

Fixes: e4d8b05ad5f9 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 5942167320a3..c4bf5fd26fa0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -120,14 +120,16 @@ enum qphy_reg_layout {
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
+	/* Keep last to ensure regs_layout arrays are properly initialized */
+	QPHY_LAYOUT_SIZE
 };
 
-static const unsigned int msm8996_ufsphy_regs_layout[] = {
+static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x00,
 	[QPHY_PCS_READY_STATUS]		= 0x168,
 };
 
-static const unsigned int pciephy_regs_layout[] = {
+static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_SW_RESET]		= 0x400,
 	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
 	[QPHY_COM_START_CONTROL]	= 0x408,
@@ -143,7 +145,7 @@ static const unsigned int pciephy_regs_layout[] = {
 	[QPHY_PCS_STATUS]		= 0x174,
 };
 
-static const unsigned int usb3phy_regs_layout[] = {
+static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_FLL_CNTRL1]		= 0xc0,
 	[QPHY_FLL_CNTRL2]		= 0xc4,
 	[QPHY_FLL_CNT_VAL_L]		= 0xc8,
@@ -157,7 +159,7 @@ static const unsigned int usb3phy_regs_layout[] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
 };
 
-static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
+static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_STATUS]		= 0x174,
@@ -166,31 +168,31 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 };
 
-static const unsigned int sdm845_qmp_pciephy_regs_layout[] = {
+static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_STATUS]		= 0x174,
 };
 
-static const unsigned int sdm845_qhp_pciephy_regs_layout[] = {
+static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_STATUS]		= 0x2ac,
 };
 
-static const unsigned int qmp_v4_usb3phy_regs_layout[] = {
+static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x44,
 	[QPHY_PCS_STATUS]		= 0x14,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
 };
 
-static const unsigned int sdm845_ufsphy_regs_layout[] = {
+static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x00,
 	[QPHY_PCS_READY_STATUS]		= 0x160,
 };
 
-static const unsigned int sm8150_ufsphy_regs_layout[] = {
+static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= QPHY_V4_PCS_UFS_PHY_START,
 	[QPHY_PCS_READY_STATUS]		= QPHY_V4_PCS_UFS_READY_STATUS,
 	[QPHY_SW_RESET]			= QPHY_V4_PCS_UFS_SW_RESET,
-- 
2.26.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux