In msm8916.dtsi the GPU OPP table is defined under the root node,
whereas in msm8996.dtsi/sdm845.dtsi it is a subnode of the gpu device
(which makes it easier to find).
Move it to the gpu device node to make this consistent.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 69129c0b20aa..32bd140ac9fd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -358,17 +358,6 @@ opp-998400000 {
};
};
- gpu_opp_table: gpu-opp-table {
- compatible = "operating-points-v2";
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- };
- };
-
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -989,6 +978,17 @@ gpu@1c00000 {
power-domains = <&gcc OXILI_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
};
mdss: mdss@1a00000 {
--
2.26.2
