[PATCH v7 10/15] thermal: devfreq_cooling: get device load and frequency directly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Devfreq cooling needs to now the correct status of the device in order
to operate. Do not rely on Devfreq last_status which might be a stale data
and get more up-to-date values of load and frequency.

In addition this patch adds normalization function, which also makes sure
that whatever data comes from the device, it is in a sane range.

Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
---
 drivers/thermal/devfreq_cooling.c | 38 +++++++++++++++++++++++++++----
 1 file changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index 52694d4bd819..396f16bb6566 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -235,6 +235,24 @@ static inline unsigned long get_total_power(struct devfreq_cooling_device *dfc,
 							       voltage);
 }
 
+static void _normalize_load(struct devfreq_dev_status *status)
+{
+	/* Make some space if needed */
+	if (status->busy_time > 0xffff) {
+		status->busy_time >>= 10;
+		status->total_time >>= 10;
+	}
+
+	if (status->busy_time > status->total_time)
+		status->busy_time = status->total_time;
+
+	status->busy_time *= 100;
+	status->busy_time /= status->total_time ? : 1;
+
+	/* Avoid division by 0 */
+	status->busy_time = status->busy_time ? : 1;
+	status->total_time = 100;
+}
 
 static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cdev,
 					       struct thermal_zone_device *tz,
@@ -242,14 +260,22 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
 {
 	struct devfreq_cooling_device *dfc = cdev->devdata;
 	struct devfreq *df = dfc->devfreq;
-	struct devfreq_dev_status *status = &df->last_status;
+	struct devfreq_dev_status status;
 	unsigned long state;
-	unsigned long freq = status->current_frequency;
+	unsigned long freq;
 	unsigned long voltage;
 	u32 dyn_power = 0;
 	u32 static_power = 0;
 	int res;
 
+	mutex_lock(&df->lock);
+	res = df->profile->get_dev_status(df->dev.parent, &status);
+	mutex_unlock(&df->lock);
+	if (res)
+		return res;
+
+	freq = status.current_frequency;
+
 	state = freq_get_state(dfc, freq);
 	if (state == THERMAL_CSTATE_INVALID) {
 		res = -EAGAIN;
@@ -277,16 +303,18 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
 	} else {
 		dyn_power = dfc->power_table[state];
 
+		_normalize_load(&status);
+
 		/* Scale dynamic power for utilization */
-		dyn_power *= status->busy_time;
-		dyn_power /= status->total_time;
+		dyn_power *= status.busy_time;
+		dyn_power /= status.total_time;
 		/* Get static power */
 		static_power = get_static_power(dfc, freq);
 
 		*power = dyn_power + static_power;
 	}
 
-	trace_thermal_power_devfreq_get_power(cdev, status, freq, *power);
+	trace_thermal_power_devfreq_get_power(cdev, &status, freq, *power);
 
 	return 0;
 fail:
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux