From: Hemant Kumar <hemantk@xxxxxxxxxxxxxx> When MHI Driver receives an EOT event, it reads xfer_len from the event in the last TRE. The value is under control of the MHI device and never validated by Host MHI driver. The value should never be larger than the real size of the buffer but a malicious device can set the value 0xFFFF as maximum. This causes driver to memory overflow (both read or write). Fix this issue by reading minimum of transfer length from event and the buffer length provided. Signed-off-by: Hemant Kumar <hemantk@xxxxxxxxxxxxxx> Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx> Reviewed-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx> --- drivers/bus/mhi/core/main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index 30798ec..6a80666 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -514,7 +514,10 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl, mhi_cntrl->unmap_single(mhi_cntrl, buf_info); result.buf_addr = buf_info->cb_buf; - result.bytes_xferd = xfer_len; + + /* truncate to buf len if xfer_len is larger */ + result.bytes_xferd = + min_t(u16, xfer_len, buf_info->len); mhi_del_ring_element(mhi_cntrl, buf_ring); mhi_del_ring_element(mhi_cntrl, tre_ring); local_rp = tre_ring->rp; @@ -598,7 +601,9 @@ static int parse_rsc_event(struct mhi_controller *mhi_cntrl, result.transaction_status = (ev_code == MHI_EV_CC_OVERFLOW) ? -EOVERFLOW : 0; - result.bytes_xferd = xfer_len; + + /* truncate to buf len if xfer_len is larger */ + result.bytes_xferd = min_t(u16, xfer_len, buf_info->len); result.buf_addr = buf_info->cb_buf; result.dir = mhi_chan->dir; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project