This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs. These regulators provide positive and/or negative boost power supplies for LCD/LED display panels connected to the SoC. This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs. Changes from v1: - Incorporated review comments from v1 - Changed from virtual-regulator based handling to individual regulator based handling. - Reworked the core to merge most of enable/disable functions, combine the regulator_ops into one and allow for future variations. - is_enabled() is now _really_ is_enabled() - Simplified the SC interrupt handling - use regmap_read_poll_timeout, REGULATOR_EVENT_OVER_CURRENT handling and notification to clients. Nisha Kumari (4): dt-bindings: regulator: Add labibb regulator arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators regulator: qcom: Add labibb driver regulator: qcom: labibb: Add SC interrupt handling .../regulator/qcom-labibb-regulator.txt | 47 +++ arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom-labibb-regulator.c | 385 ++++++++++++++++++ 5 files changed, 459 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt create mode 100644 drivers/regulator/qcom-labibb-regulator.c -- 2.26.2
