On Fri, May 08, 2020 at 12:03:35PM +0530, Akash Asthana wrote:
> Get the interconnect paths for I2C based Serial Engine device
> and vote according to the bus speed of the driver.
>
> Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
> - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get
> - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
> - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
> path handle
> - As per Matthias comment, added error handling for icc_set_bw call
>
> Changes in V3:
> - As per Matthias comment, use common library APIs defined in geni-se
> driver for ICC functionality.
>
> Changes in V4:
> - Move peak_bw guess as twice of avg_bw if nothing mentioned explicitly
> to ICC core.
>
> Changes in V5:
> - Use icc_enable/disable in power on/off call.
>
> drivers/i2c/busses/i2c-qcom-geni.c | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 18d1e4f..f2e786d 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -557,6 +557,25 @@ static int geni_i2c_probe(struct platform_device *pdev)
> gi2c->adap.dev.of_node = dev->of_node;
> strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
>
> + ret = geni_icc_get(&gi2c->se, "qup-memory");
> + if (ret)
> + return ret;
> + /*
> + * Set the bus quota for core and cpu to a reasonable value for
> + * register access.
> + * Set quota for DDR based on bus speed.
> + */
> + geni_icc_bw_init(&gi2c->se.icc_paths[GENI_TO_CORE], GENI_DEFAULT_BW,
> + 0);
> + geni_icc_bw_init(&gi2c->se.icc_paths[CPU_TO_GENI], GENI_DEFAULT_BW,
> + 0);
> + geni_icc_bw_init(&gi2c->se.icc_paths[GENI_TO_DDR],
> + Bps_to_icc(gi2c->clk_freq_out), 0);
> +
> + ret = geni_icc_set_bw(&gi2c->se);
> + if (ret)
> + return ret;
> +
> ret = geni_se_resources_on(&gi2c->se);
> if (ret) {
> dev_err(dev, "Error turning on resources %d\n", ret);
> @@ -579,6 +598,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = geni_icc_disable(&gi2c->se);
> + if (ret)
> + return ret;
> +
> dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
>
> gi2c->suspended = 1;
> @@ -623,7 +646,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
> gi2c->suspended = 1;
> }
>
> - return 0;
> + return geni_icc_disable(&gi2c->se);
> }
>
> static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
> @@ -631,6 +654,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
> int ret;
> struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
>
> + ret = geni_icc_enable(&gi2c->se);
> + if (ret)
> + return ret;
> +
> ret = geni_se_resources_on(&gi2c->se);
> if (ret)
> return ret;
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
