Re: [PATCH v6 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 05, 2020 at 03:47:10PM -0700, Bhaumik Bhatt wrote:
> When loading AMSS firmware using BHIe protocol, return -ETIMEDOUT if no
> response is received within the timeout or return -EIO in case of a
> protocol returned failure or an MHI error state.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
> Reviewed-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
> ---
>  drivers/bus/mhi/core/boot.c | 23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
> index 17c636b..05627fe 100644
> --- a/drivers/bus/mhi/core/boot.c
> +++ b/drivers/bus/mhi/core/boot.c
> @@ -176,6 +176,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
>  	void __iomem *base = mhi_cntrl->bhie;
>  	rwlock_t *pm_lock = &mhi_cntrl->pm_lock;
>  	u32 tx_status, sequence_id;
> +	int ret;
>  
>  	read_lock_bh(pm_lock);
>  	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
> @@ -198,19 +199,19 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
>  	read_unlock_bh(pm_lock);
>  
>  	/* Wait for the image download to complete */
> -	wait_event_timeout(mhi_cntrl->state_event,
> -			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
> -			   mhi_read_reg_field(mhi_cntrl, base,
> -					      BHIE_TXVECSTATUS_OFFS,
> -					      BHIE_TXVECSTATUS_STATUS_BMSK,
> -					      BHIE_TXVECSTATUS_STATUS_SHFT,
> -					      &tx_status) || tx_status,
> -			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
> -
> -	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
> +	ret = wait_event_timeout(mhi_cntrl->state_event,
> +				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
> +				 mhi_read_reg_field(mhi_cntrl, base,
> +						    BHIE_TXVECSTATUS_OFFS,
> +						   BHIE_TXVECSTATUS_STATUS_BMSK,
> +						   BHIE_TXVECSTATUS_STATUS_SHFT,

If you want to prevent some parameters to be within 80 characters that is fine
but do it for all to look uniform:

                              mhi_read_reg_field(mhi_cntrl, base,
                                                BHIE_TXVECSTATUS_OFFS,
                                                BHIE_TXVECSTATUS_STATUS_BMSK,
                                                BHIE_TXVECSTATUS_STATUS_SHFT,
						&tx_status) || tx_status,

Thanks,
Mani

> +						    &tx_status) || tx_status,
> +				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
> +	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state) ||
> +	    tx_status != BHIE_TXVECSTATUS_STATUS_XFER_COMPL)
>  		return -EIO;
>  
> -	return (tx_status == BHIE_TXVECSTATUS_STATUS_XFER_COMPL) ? 0 : -EIO;
> +	return (!ret) ? -ETIMEDOUT : 0;
>  }
>  
>  static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux