On Tue, May 5, 2020 at 4:43 PM Manaf Meethalavalappu Pallikunhi <manafm@xxxxxxxxxxxxxx> wrote: > > Add 0C (zeroc) interrupt support for tsens in yaml. > > Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > index 2ddd39d96766..8a0893f77d20 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -52,12 +52,14 @@ properties: > items: > - description: Combined interrupt if upper or lower threshold crossed > - description: Interrupt if critical threshold crossed > + - description: Interrupt if zeroC threshold is crossed > > interrupt-names: > minItems: 1 > items: > - const: uplow > - const: critical > + - const: zeroc > > nvmem-cells: > minItems: 1 > @@ -168,8 +170,9 @@ examples: > <0xc222000 0x1ff>; > > interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "uplow", "critical"; > + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "uplow", "critical", "zeroc"; Add a new example for v2 with 0C interrupt here instead of reusing the old one. > #qcom,sensors = <13>; > #thermal-sensor-cells = <1>; > -- > 2.26.2
