On Wed, 29 Apr 2020 23:19:25 +0200, Ansuel Smith wrote: > Document dwc3 qcom phy hs and ss phy bindings needed to correctly > inizialize and use usb on ipq806x SoC. > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> > --- > v4: > * Add qcom to specific bindings > v3: > * Use explicit reg instead of regmap > > .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 58 +++++++++++++++ > .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 73 +++++++++++++++++++ > 2 files changed, 131 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml > create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,tx_deamp_3_5db: {'maxItems': 1, 'description': 'Override value for transmit preemphasis.', 'default': 23} is not valid under any of the given schemas (Possible causes of the failure): /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,tx_deamp_3_5db: 'not' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,rx_eq: {'maxItems': 1, 'description': 'Override value for rx_eq.', 'default': 4} is not valid under any of the given schemas (Possible causes of the failure): /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,rx_eq: 'not' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,mpll: {'maxItems': 1, 'description': 'Override value for mpll.', 'default': 0} is not valid under any of the given schemas (Possible causes of the failure): /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: properties:qcom,mpll: 'not' is a required property Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.example.dts' failed make[1]: *** [Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... warning: no schema found in file: Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: ignoring, error in schema: properties: qcom,mpll warning: no schema found in file: Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml: ignoring, error in schema: properties: qcom,mpll Makefile:1300: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1279692 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.