Re: [PATCH v3 15/17] spi: spi-qcom-qspi: Use OPP API to set clk/perf state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Apr 28, 2020 at 07:03:03PM +0530, Rajendra Nayak wrote:
> QSPI needs to vote on a performance state of a power domain depending on
> the clock rate. Add support for it by specifying the perf state/clock rate
> as an OPP table in device tree.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Cc: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> Cc: linux-spi@xxxxxxxxxxxxxxx
> ---
>  drivers/spi/spi-qcom-qspi.c | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
> index 3c4f83b..724a658 100644
> --- a/drivers/spi/spi-qcom-qspi.c
> +++ b/drivers/spi/spi-qcom-qspi.c
> @@ -8,6 +8,7 @@
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/pm_opp.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/spi-mem.h>
>  
> @@ -139,6 +140,8 @@ struct qcom_qspi {
>  	struct device *dev;
>  	struct clk_bulk_data *clks;
>  	struct qspi_xfer xfer;
> +	struct opp_table *opp_table;
> +	bool has_opp_table;
>  	/* Lock to protect xfer and IRQ accessed registers */
>  	spinlock_t lock;
>  };
> @@ -235,7 +238,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
>  		speed_hz = xfer->speed_hz;
>  
>  	/* In regular operation (SBL_EN=1) core must be 4x transfer clock */
> -	ret = clk_set_rate(ctrl->clks[QSPI_CLK_CORE].clk, speed_hz * 4);
> +	ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
>  	if (ret) {
>  		dev_err(ctrl->dev, "Failed to set core clk %d\n", ret);
>  		return ret;
> @@ -481,6 +484,20 @@ static int qcom_qspi_probe(struct platform_device *pdev)
>  	master->handle_err = qcom_qspi_handle_err;
>  	master->auto_runtime_pm = true;
>  
> +	ctrl->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
> +	if (IS_ERR(ctrl->opp_table)) {
> +		ret = PTR_ERR(ctrl->opp_table);
> +		goto exit_probe_master_put;
> +	}
> +	/* OPP table is optional */
> +	ret = dev_pm_opp_of_add_table(&pdev->dev);
> +	if (!ret) {
> +		ctrl->has_opp_table = true;
> +	} else if (ret != -ENODEV) {
> +		dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
> +		return ret;

		goto exit_probe_master_put;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux