On Tue 07 Apr 18:28 PDT 2020, Bjorn Andersson wrote:
> The AHB clock must be on for qcom_snps_hsphy_init() to be able to write
> the initialization sequence to the hardware, so move the clock
> enablement to phy init and exit.
>
> Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Kishon, can we have this picked up?
Thanks,
Bjorn
> ---
> drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 32 ++++++++++++++-------
> 1 file changed, 21 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> index d998e65c89c8..a52a9bf13b75 100644
> --- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> @@ -160,18 +160,11 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
> ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
> if (ret)
> return ret;
> - ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> - if (ret)
> - goto err_disable_regulator;
> +
> qcom_snps_hsphy_disable_hv_interrupts(priv);
> qcom_snps_hsphy_exit_retention(priv);
>
> return 0;
> -
> -err_disable_regulator:
> - regulator_bulk_disable(VREG_NUM, priv->vregs);
> -
> - return ret;
> }
>
> static int qcom_snps_hsphy_power_off(struct phy *phy)
> @@ -180,7 +173,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)
>
> qcom_snps_hsphy_enter_retention(priv);
> qcom_snps_hsphy_enable_hv_interrupts(priv);
> - clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> regulator_bulk_disable(VREG_NUM, priv->vregs);
>
> return 0;
> @@ -266,21 +258,39 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> struct hsphy_priv *priv = phy_get_drvdata(phy);
> int ret;
>
> - ret = qcom_snps_hsphy_reset(priv);
> + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> if (ret)
> return ret;
>
> + ret = qcom_snps_hsphy_reset(priv);
> + if (ret)
> + goto disable_clocks;
> +
> qcom_snps_hsphy_init_sequence(priv);
>
> ret = qcom_snps_hsphy_por_reset(priv);
> if (ret)
> - return ret;
> + goto disable_clocks;
> +
> + return 0;
> +
> +disable_clocks:
> + clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> + return ret;
> +}
> +
> +static int qcom_snps_hsphy_exit(struct phy *phy)
> +{
> + struct hsphy_priv *priv = phy_get_drvdata(phy);
> +
> + clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
>
> return 0;
> }
>
> static const struct phy_ops qcom_snps_hsphy_ops = {
> .init = qcom_snps_hsphy_init,
> + .exit = qcom_snps_hsphy_exit,
> .power_on = qcom_snps_hsphy_power_on,
> .power_off = qcom_snps_hsphy_power_off,
> .set_mode = qcom_snps_hsphy_set_mode,
> --
> 2.24.0
>
