It's uncertain where the "vreg_s8a_l3a_input" comes from, but the supply
for VDD_L3_L11 on PM8994 should be VREG_S3A_1P3, so correct this - and
drop the vreg_s8a_l3a_input.
Fixes: 83d9ed4342a3 ("arm64: dts: qcom: db820c: Use regulator names from schematics")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 1baf41fbdf6e..46595fb95cce 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -117,16 +117,6 @@ vph_pwr: vph-pwr-regulator {
regulator-max-microvolt = <3700000>;
};
- vreg_s8a_l3a_input: vreg-s8a-l3a-input {
- compatible = "regulator-fixed";
- regulator-name = "vreg_s8a_l3a_input";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-min-microvolt = <0>;
- regulator-max-microvolt = <0>;
- };
-
wlan_en: wlan-en-1-8v {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_gpios>;
@@ -720,7 +710,7 @@ pm8994-regulators {
vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&vreg_s1b_1p025>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
- vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
+ vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
@@ -731,7 +721,7 @@ pm8994-regulators {
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
vdd_l25-supply = <&vreg_s3a_1p3>;
- vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
--
2.24.0
