Change the listed examples to use more generic node names, representing
the class of the device nodes:
- apr-service@<id>
- dai@<id>
Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
Also add #address-cells + #size-cells to the q6asm example,
without them the example produces dtc warnings.
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
.../devicetree/bindings/sound/qcom,q6adm.txt | 2 +-
.../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++----------
.../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++-
.../devicetree/bindings/sound/qcom,q6core.txt | 2 +-
4 files changed, 30 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
Definition: Must be 0
= EXAMPLE
-q6adm@8 {
+apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6afe@4 {
+apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
@@ -110,12 +110,12 @@ q6afe@4 {
#address-cells = <1>;
#size-cells = <0>;
- hdmi@1 {
- reg = <1>;
+ dai@1 {
+ reg = <HDMI_RX>;
};
- tdm@24 {
- reg = <24>;
+ dai@24 {
+ reg = <PRIMARY_TDM_RX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
};
- tdm@25 {
- reg = <25>;
+ dai@25 {
+ reg = <PRIMARY_TDM_TX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
qcom,tdm-data-align = <0>;
};
- prim-mi2s-rx@16 {
- reg = <16>;
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
qcom,sd-lines = <0 2>;
};
- prim-mi2s-tx@17 {
- reg = <17>;
+ dai@17 {
+ reg = <PRIMARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- sec-mi2s-rx@18 {
- reg = <18>;
+ dai@18 {
+ reg = <SECONDARY_MI2S_RX>;
qcom,sd-lines = <0 3>;
};
- sec-mi2s-tx@19 {
- reg = <19>;
+ dai@19 {
+ reg = <SECONDARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- tert-mi2s-rx@20 {
- reg = <20>;
+ dai@20 {
+ reg = <TERTIARY_MI2S_RX>;
qcom,sd-lines = <1 3>;
};
- tert-mi2s-tx@21 {
- reg = <21>;
+ dai@21 {
+ reg = <TERTIARY_MI2S_TX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-rx@22 {
- reg = <22>;
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-tx@23 {
- reg = <23>;
+ dai@23 {
+ reg = <QUATERNARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6asm@7 {
+apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
#sound-dai-cells = <1>;
- mm@0 {
+
+ dai@0 {
reg = <0>;
direction = <2>;
is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
example "qcom,q6core-v2.0"
= EXAMPLE
-q6core@3 {
+apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
--
2.26.1
