On Tue 14 Apr 15:24 PDT 2020, John Stultz wrote: > On Tue, Apr 14, 2020 at 3:21 PM Bjorn Andersson > <bjorn.andersson@xxxxxxxxxx> wrote: > > > > On Thu 26 Mar 15:44 PDT 2020, John Stultz wrote: > > > > > This patch allow the rpmpd driver to be loaded as a permenent > > > module. Meaning it can be loaded from a module, but then cannot > > > be unloaded. > > > > > > Ideally, it would include a remove hook and related logic, but > > > apparently the genpd code isn't able to track usage and cleaning > > > things up? (See: https://lkml.org/lkml/2019/1/24/38) > > > > > > So making it a permenent module at least improves things slightly > > > over requiring it to be a built in driver. > > > > > > Feedback would be appreciated! > > > > > > Cc: Todd Kjos <tkjos@xxxxxxxxxx> > > > Cc: Saravana Kannan <saravanak@xxxxxxxxxx> > > > Cc: Andy Gross <agross@xxxxxxxxxx> > > > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > > > Cc: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> > > > Cc: linux-arm-msm@xxxxxxxxxxxxxxx > > > Acked-by: Saravana Kannan <saravanak@xxxxxxxxxx> > > > Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> > > > --- > > > v2: > > > * Fix MODULE_LICENSE to be GPL v2 as suggested by Bjorn > > > * Leave initcall as core_initcall, since that switches to module_initcall > > > only when built as a module, also suggested by Bjorn > > > * Add module tags taken from Rajendra's earlier patch > > > --- > > > drivers/soc/qcom/Kconfig | 4 ++-- > > > drivers/soc/qcom/rpmpd.c | 6 ++++++ > > > 2 files changed, 8 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > > > index d0a73e76d563..af774555b9d2 100644 > > > --- a/drivers/soc/qcom/Kconfig > > > +++ b/drivers/soc/qcom/Kconfig > > > @@ -123,8 +123,8 @@ config QCOM_RPMHPD > > > for the voltage rail. > > > > > > config QCOM_RPMPD > > > - bool "Qualcomm RPM Power domain driver" > > > - depends on QCOM_SMD_RPM=y > > > + tristate "Qualcomm RPM Power domain driver" > > > + depends on QCOM_SMD_RPM > > > help > > > QCOM RPM Power domain driver to support power-domains with > > > performance states. The driver communicates a performance state > > > diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c > > > index 2b1834c5609a..22fe94c03e79 100644 > > > --- a/drivers/soc/qcom/rpmpd.c > > > +++ b/drivers/soc/qcom/rpmpd.c > > > @@ -5,6 +5,7 @@ > > > #include <linux/init.h> > > > #include <linux/kernel.h> > > > #include <linux/mutex.h> > > > +#include <linux/module.h> > > > > module comes before mutex in the alphabet. > > :) Thanks for catching that. > > > > #include <linux/pm_domain.h> > > > #include <linux/of.h> > > > #include <linux/of_device.h> > > > @@ -226,6 +227,7 @@ static const struct of_device_id rpmpd_match_table[] = { > > > { .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc }, > > > { } > > > }; > > > +MODULE_DEVICE_TABLE(of, rpmpd_match_table); > > > > > > static int rpmpd_send_enable(struct rpmpd *pd, bool enable) > > > { > > > @@ -422,3 +424,7 @@ static int __init rpmpd_init(void) > > > return platform_driver_register(&rpmpd_driver); > > > } > > > core_initcall(rpmpd_init); > > > + > > > +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPM Power Domain Driver"); > > > +MODULE_LICENSE("GPL v2"); > > > +MODULE_ALIAS("platform:qcom-rpmpd"); > > > > Is there any reason for this alias? > > > > The module will be automatically loaded based on compatible and the > > MODULE_DEVICE_TABLE() information above, and for ACPI would need a > > similar acpi_device_id table. > > I pulled it in from Rajendra's earlier patch. I'm ok to drop it though. > > I'll fix these up and respin. Thanks for the review! > No worries, I'll fix these two things and apply the patch. Just wanted to check if I was missing something. Regards, Bjorn
