Re: [PATCH v3 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Wesley Cheng (2020-04-07 15:23:27)
> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
> index e46824d..3158c14 100644
> --- a/drivers/phy/qualcomm/Kconfig
> +++ b/drivers/phy/qualcomm/Kconfig
> @@ -85,6 +85,16 @@ config PHY_QCOM_USB_HS
>           Support for the USB high-speed ULPI compliant phy on Qualcomm
>           chipsets.
>  
> +config PHY_QCOM_USB_SNPS_HS_7NM
> +       tristate "Qualcomm 7nm USB HS PHY module"
> +       depends on OF && (ARCH_QCOM || COMPILE_TEST)
> +       select GENERIC_PHY
> +       help
> +         Enable support for the USB high-speed SNPS phy on Qualcomm 7nm
> +         chipsets.  This PHY has differences in the register map compared
> +         to the 28nm variant.  The PHY is paired with a Synopsys DWC3 USB
> +         controller on MSM SOCs.

s/MSM/Qualcomm/?

> +
>  config PHY_QCOM_USB_HSIC
>         tristate "Qualcomm USB HSIC ULPI PHY module"
>         depends on USB_ULPI_BUS
> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-7nm.c b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
> new file mode 100644
> index 0000000..00a46cd
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
> @@ -0,0 +1,294 @@
[...]
> +
> +/**
> + * struct qcom_snps_hsphy - structure holding snps hs phy attributes

snps hs phy attributes

structure and holding are redundant.

> + *
> + * @phy: generic phy
> + * @base: iomapped memory space for qubs2 phy
> + *
> + * @cfg_ahb_clk: AHB2PHY interface clock
> + * @ref_clk: phy reference clock
> + * @iface_clk: phy interface clock
> + * @phy_reset: phy reset control
> + * @vregs: regulator supplies bulk data
> +
> + * @phy_initialized: if PHY has been initialized correctly

Please drop space between members in the kernel-doc.

> + *
> + */
> +struct qcom_snps_hsphy {
> +       struct phy *phy;
> +       void __iomem *base;
> +
> +       struct clk *cfg_ahb_clk;
> +       struct clk *ref_clk;
> +       struct reset_control *phy_reset;
> +       struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
> +
> +       bool phy_initialized;
> +};
> +
> +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
> +                                   u32 mask, u32 val)
> +{
> +       u32 reg;
> +
> +       reg = readl(base + offset);
> +       reg &= ~mask;
> +       reg |= val & mask;
> +       writel(reg, base + offset);

Make these relaxed?

> +
> +       /* Ensure above write is completed */
> +       readl(base + offset);

And this one too?

> +}
> +
> +static int qcom_snps_hsphy_init(struct phy *phy)
> +{
> +       struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> +       int ret;
> +
> +       dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
> +
> +       /* turn on regulator supplies */

These comments don't tell us anything besides what the code is doing so
they don't seem useful.

> +       ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
> +       if (ret)
> +               return ret;
> +
> +       /* enable ahb interface clock to program phy */
> +       ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
> +       if (ret) {
> +               dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
> +               goto poweroff_phy;
> +       }
> +
> +       /* Perform phy reset */
> +       ret = reset_control_assert(hsphy->phy_reset);
> +       if (ret) {
> +               dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
> +               goto disable_ahb_clk;
> +       }
> +
> +       /* 100 us delay to keep PHY in reset mode */
> +       usleep_range(100, 150);
> +
> +       ret = reset_control_deassert(hsphy->phy_reset);
> +       if (ret) {
> +               dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
> +               goto disable_ahb_clk;
> +       }
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
> +                                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
> +                                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
> +                                                       POR, POR);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
> +                                                       FSEL_MASK, 0);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
> +                                       PLLBTUNE, PLLBTUNE);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
> +                                       REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
> +                                       VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
> +                                       VBUSVLDEXT0, VBUSVLDEXT0);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
> +                                       VREGBYPASS, VREGBYPASS);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
> +                                       USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
> +                                       USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
> +                                       SLEEPM, SLEEPM);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
> +                                       POR, 0);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
> +                                       USB2_SUSPEND_N_SEL, 0);
> +
> +       qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
> +                                       UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
> +
> +       hsphy->phy_initialized = true;
> +
> +       return 0;
> +
> +disable_ahb_clk:
> +       clk_disable_unprepare(hsphy->cfg_ahb_clk);
> +poweroff_phy:
> +       regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
> +
> +       return ret;
> +}
> +
> +static int qcom_snps_hsphy_exit(struct phy *phy)
> +{
> +       struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> +
> +       reset_control_assert(hsphy->phy_reset);
> +       clk_disable_unprepare(hsphy->cfg_ahb_clk);
> +       regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
> +       hsphy->phy_initialized = false;
> +
> +       return 0;
> +}
> +
> +static const struct phy_ops qcom_snps_hsphy_gen_ops = {
> +       .init           = qcom_snps_hsphy_init,
> +       .exit           = qcom_snps_hsphy_exit,
> +       .owner          = THIS_MODULE,
> +};
> +
> +static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
> +       {
> +               .compatible     = "qcom,sm8150-usb-hs-phy",
> +       },
> +       {
> +               .compatible     = "qcom,usb-snps-hs-7nm-phy",
> +       },
> +       { },

Can this be on one line?

          { .compatible     = "qcom,sm8150-usb-hs-phy", },
          { .compatible     = "qcom,usb-snps-hs-7nm-phy", },
          { }

Also drop comma on the last element so nothing can follow without
causing compile error.

> +};
> +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
> +
> +static int qcom_snps_hsphy_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct qcom_snps_hsphy *hsphy;
> +       struct phy_provider *phy_provider;
> +       struct phy *generic_phy;
> +       struct resource *res;
> +       int ret, i;
> +       int num;
> +
> +       hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
> +       if (!hsphy)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       hsphy->base = devm_ioremap_resource(dev, res);

devm_platform_ioremap_resource()?

> +       if (IS_ERR(hsphy->base))
> +               return PTR_ERR(hsphy->base);
> +
> +       hsphy->ref_clk = devm_clk_get(dev, "ref");
> +       if (IS_ERR(hsphy->ref_clk)) {
> +               ret = PTR_ERR(hsphy->ref_clk);
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(dev, "failed to get ref clk, %d\n", ret);
> +               return ret;
> +       }
> +
> +       hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +       if (IS_ERR(hsphy->phy_reset)) {
> +               dev_err(dev, "failed to get phy core reset\n");
> +               return PTR_ERR(hsphy->phy_reset);
> +       }
> +
> +       num = ARRAY_SIZE(hsphy->vregs);
> +       for (i = 0; i < num; i++)
> +               hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i];
> +
> +       ret = devm_regulator_bulk_get(dev, num, hsphy->vregs);
> +       if (ret) {
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(dev, "failed to get regulator supplies: %d\n",
> +                               ret);
> +               return ret;
> +       }
> +
> +       generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
> +       if (IS_ERR(generic_phy)) {
> +               ret = PTR_ERR(generic_phy);
> +               dev_err(dev, "failed to create phy, %d\n", ret);
> +               return ret;
> +       }
> +       hsphy->phy = generic_phy;
> +
> +       dev_set_drvdata(dev, hsphy);
> +       phy_set_drvdata(generic_phy, hsphy);
> +
> +       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +       if (!IS_ERR(phy_provider))
> +               dev_info(dev, "Registered Qcom-SNPS HS phy\n");

dev_dbg()? Or just remove it?

> +
> +       return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct platform_driver qcom_snps_hsphy_driver = {
> +       .probe          = qcom_snps_hsphy_probe,
> +       .driver = {
> +               .name   = "qcom-snps-hs-7nm-phy",
> +               .of_match_table = qcom_snps_hsphy_of_match_table,
> +       },
> +};
> +
> +module_platform_driver(qcom_snps_hsphy_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm 7nm USB HS PHY driver");




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux