Hi all, This patch set introduces support for devices in the Energy Model (EM) framework. It will unify the power model for thermal subsystem. It will make simpler to add support for new devices willing to use more advanced features (like Intelligent Power Allocation). Now it should require less knowledge and effort for driver developer to add e.g. GPU driver with simple energy model. A more sophisticated energy model in the thermal framework is also possible, driver needs to provide a dedicated callback function. More information can be found in the updated documentation file. First 7 patches are refactoring Energy Model framework to add support of other devices that CPUs. They change: - naming convention from 'capacity' to 'performance' state, - API arguments adding device pointer and not rely only on cpumask, - change naming when 'cpu' was used, now it's a 'device' - internal structure to maintain registered devices - update users to the new API Patch 8 updates OPP framework helper function to be more generic, not CPU specific. Patch 9 changes devfreq cooling, dropping part of old power model and adding registration with Energy Model via exported GPL function. It uses as a base the new PM QoS mechanism which is now in thermal-next. Patch 10 is a simple change for Panfrost GPU driver. The patch set is based on linux-next tag next-20200409. Changes: v6: - split patch 1/5 from v5 into smaller patches as requested by Daniel and dropped ACK from Quentin which was in the old there - added function em_dev_register_perf_domain as suggested by Daniel, which would help transition into the new API - changed 'cs' (capacity state) in different places into 'ps' (performance state), since now there are many smaller patches (previously skipped because of too big size of the patch with main features and left to do later) - changed cpumask_equal() to cpumask_intersects() when checking if 'cpus' coming as an argument to registration function might overlap with already known; this shouldn't be an issue when cpufreq policy is OK, but a check doesn't harm - added Reviewed-by from Alyssa into Panfrost related patch - dropped Matthias patch with PM QoS from the series since it's in the next now v5 [5]: - devfreq cooling: rebased on top of pending patch introducing PM QoS limits - devfreq cooling: added Matthias's patch to make this series build check pass - devfreq cooling: removed OPP disable code and switched to PM QoS - devfreq cooling: since thermal code always used a pointer to devfreq_dev_status, switched to work on a local copy and avoid potential race when either busy_time or total_time could change in the background - devfreq cooling: added _normalize_load() and handle all scenarios when busy_time and total_time could have odd values (even raw counters) - Energy Model patch 2/4: removed prints from cpufreq drivers and added print inside dev_pm_opp_of_register_em() - update patch 2/4 description to better reflect upcoming changes - collected ACK from Quentin for patch 1/4 and Reviewed-by from Steven for 4/4 v4 [4]: - devfreq cooling: added two new registration functions, which will take care of registering EM for the device and simplify drivers code (suggested by Robin and Rob) - Energy Model: changed unregistering code, added kref to track usage, added code freeing tables, added helper function - added return value to function dev_pm_opp_of_register_em() and updated CPUFreq drivers code, added debug prints in case of failure - updated comments in devfreq cooling removing statement that only simple_ondemand devfreq governor is supported to work with power extentions - fixed spelling in the documentation (reported by Randy) v3 [3]: - added back the cpumask 'cpus' in the em_perf_domain due potential cache misses - removed _is_cpu_em() since there is no need for it - changed function name from em_pd_energy() to em_cpu_energy(), which is optimized for usage from the scheduler making some assumptions and not validating arguments to speed-up, there is a comment stressing that it should be used only for CPUs em_perf_domain - changed em_get_pd() to em_pd_get() which is now aligned with em_cpu_get() naming - Energy Model: add code which checks if the EM is already registered for the devfreq device - extended comment in em_cpu_get() describing the need for this function - fixed build warning reported on x86 by kbuild test robot in devfreq_cooling.c - updated documentation in the energy-model.rst - changed print messages from 'energy_model' to 'EM' - changed dev_warn to dev_dbg, should calm down test scripts in case the platform has OPPs less efficient in the OPP table (some of them are there for cooling reasons, we shouldn't warn in this case, debug info is enough) v2 [2]: - changed EM API em_register_perf_domain() adding cpumask_t pointer as last argument (which was discussed with Dietmar and Quentin) - removed dependency on PM_OPP, thanks to the cpumask_t argument - removed enum em_type and em->type dependent code - em_get_pd() can handle CPU device as well as devfreq device - updated EM documentation - in devfreq cooling added code which prevents from race condition with devfreq governors which are trying to use OPPs while thermal is in the middle of disabling them. - in devfreq cooling added code which updates state of the devfreq device to avoid working on stale data when governor has not updated it for a long time - in devfreq cooling added backward compatibility frequency table for drivers which did not provide EM - added Steven's Reviewed-by to trace code in thermal - added another CPUFreq driver which needs to be updated to the new API The v1 can be found here [1]. Regards, Lukasz Luba [1] https://lkml.org/lkml/2020/1/16/619 [2] https://lkml.org/lkml/2020/2/6/377 [3] https://lkml.org/lkml/2020/2/21/1910 [4] https://lkml.org/lkml/2020/3/9/471 [5] https://lkml.org/lkml/2020/3/18/351 Lukasz Luba (10): PM / EM: change naming convention from 'capacity' to 'performance' PM / EM: introduce em_dev_register_perf_domain function PM / EM: update callback structure and add device pointer PM / EM: add support for other devices than CPUs in Energy Model PM / EM: remove em_register_perf_domain PM / EM: change name of em_pd_energy to em_cpu_energy Documentation: power: update Energy Model description OPP: refactor dev_pm_opp_of_register_em() and update related drivers thermal: devfreq_cooling: Refactor code and switch to use Energy Model drm/panfrost: Register devfreq cooling and attempt to add Energy Model Documentation/power/energy-model.rst | 135 +++--- drivers/cpufreq/cpufreq-dt.c | 2 +- drivers/cpufreq/imx6q-cpufreq.c | 2 +- drivers/cpufreq/mediatek-cpufreq.c | 2 +- drivers/cpufreq/omap-cpufreq.c | 2 +- drivers/cpufreq/qcom-cpufreq-hw.c | 2 +- drivers/cpufreq/scmi-cpufreq.c | 11 +- drivers/cpufreq/scpi-cpufreq.c | 2 +- drivers/cpufreq/vexpress-spc-cpufreq.c | 2 +- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 2 +- drivers/opp/of.c | 76 ++-- drivers/thermal/cpufreq_cooling.c | 12 +- drivers/thermal/devfreq_cooling.c | 474 +++++++++---------- include/linux/devfreq_cooling.h | 39 +- include/linux/energy_model.h | 152 ++++--- include/linux/pm_opp.h | 15 +- include/trace/events/thermal.h | 19 +- kernel/power/energy_model.c | 477 ++++++++++++++++---- kernel/sched/fair.c | 2 +- kernel/sched/topology.c | 20 +- 20 files changed, 918 insertions(+), 530 deletions(-) -- 2.17.1
