[PATCH 12/21] arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 48 ++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index efba600..db5b3b3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1581,6 +1581,49 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		mdp_opp_table: mdp-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-345000000 {
+				opp-hz = /bits/ 64 <345000000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-460000000 {
+				opp-hz = /bits/ 64 <460000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-187500000 {
+				opp-hz = /bits/ 64 <187500000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sc7180-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -1626,6 +1669,8 @@
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				assigned-clock-rates = <300000000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -1666,6 +1711,9 @@
 					      "iface",
 					      "bus";
 
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
 				phys = <&dsi_phy>;
 				phy-names = "dsi";
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux